eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


QSL Managers
     

Ham Links
     



[Articles Home]  [Add Article]  

Hints & Kinks: PL-259 Connector Tool for Coax Cables:

from The ARRL Letter on November 19, 2009
Website: http://www.arrl.org/
View comments about this article!

Hints & Kinks: PL-259 Connector Tool for Coax Cables:

Tired of using pliers to screw on the PL-259 connectors when you are preparing cables? Pliers always seem to do some damage by the amount of force this task requires. I use an inexpensive 1/2 inch PVC female to male coupler. Simply use a step drill and ream out the female end. This works for most half inch coaxial cables.
PL-259s do vary in diameter. Be sure to measure yours before you ream out the PVC adapter. It will not take a lot of reaming for the connector to fit snugly. The outer part of the PL-259 that fits into the connector is 0.55 inch diameter. This makes a secure fit. If you wear out the adapter, purchase another, as they are inexpensive. This works for me. -- 73, Paul Marsha, K4AVU, 200 Garden Trail Ln, Lexington, SC 29072-7341

Source:

The ARRL Letter

Member Comments:
This article has expired. No more comments may be added.
 
Hints & Kinks: PL-259 Connector Tool for Coax Cables:  
by G6NJR on November 20, 2009 Mail this to a friend!
easiest method by far is leave the outer sleve on the connector then screw the connector into an 90 degree coupling use that to screw the connector onto the coax works every time never had a bad PL or one come off ( mond you i change nearly all of them for N Types given the cohice)
 
RE: Hints & Kinks: PL-259 Connector Tool for Coax Cables  
by KE5MXA on November 22, 2009 Mail this to a friend!
i have never had to use plyers to install pl-259s. I just grab the connector and screw them on. the only time i use plyers is if i am working with rg-8x to snug the reducer into the connector before soldering. But then again, i'm 37 and have good grip strength. The pvc is a neat idea to keep from crushing the connector making it out of round.
Shawn
 
Email Subscription
You are not subscribed to discussions on this article.

Subscribe!
My Subscriptions
Subscriptions Help

Other News Articles
VK5RJ Still Gracing the Airwaves at Age 101:
rec.radio.amateur.moderated -- 5 Yrs. Old:
Tune-In To The World -- Amateur Radio Gets People Talking:
Student Sends MIT Letter to Space:
Amateur Radio Club Talks to Hams Worldwide on Centennial: