First North America-To-South America Contact On 902 MHz Moonbounce Reported
The ARRL Letter
June 12, 2014
Add a comment about this article!
First North America-To-South America Contact On 902 MHz Moonbounce Reported:
Some hams may not even realize that there is a ham band at 902 MHz, but
firstname.lastname@example.org, PY2BS, in Embu, Brazil, reported on the
http://mailman.pe1itr.com/mailman/listinfo/moon-net that after months
of preparation and testing, he and Al Ward, W5LUA, in Allen, Texas,
completed a two-way EME (Earth-Moon-Earth) -- or moonbounce -- contact
on the band on June 8.
PY2BS said the main issues he had on his end involved reception,
including "an in-band noise from another service" that he could not
eliminate by filtering. "Fortunately," he said, "its bursts are spaced
enough apart to allow [reception] from the moon-coming signals in
W5LUA has a 5 meter solid dish and was running about 400 W at the feed
point. PY2BS used a 5.1 meter mesh dish with 180 W at the feed point.
Both used very low noise FET preamplifiers. W5LUA and PY2BS exchanged
reports on CW (549/559) and JT65C (-17dB/-18 dB).
"We've found out that [the] Faraday [effect] does exist at 902; [it]
just rolls kinda slow," Halasz added. He said his 902 MHz setup is
temporary, but he is interested in contacting other stations. -- Thanks
to Bart Jahnke, W9JJ
The ARRL Letter
There are no comments on this article:
Other News Articles
Petaluman Shares Love of Skies, Safety:
Sun Blasts Out 2016's Strongest Flare (Video):
Ham Talk Live #24 -- Log Analysis NV9L:
Everything Ham Radio Podcast -- Mobile Radios:
St Albans Student Brought Down to Earth for Meeting with Astronaut Tim Peak