SOLD***Complete Ham II rotor with control box, lower mast support and original manual. All hardware is included: all bolts to mount the rotor, u-bolts, nuts and washers to clamp the mast and the nuts and bolts for the lower mast support. Handles 7.5 square feet of wind surface area when using the lower mast support or 10 square feet of wind surface area when mounted inside a tower. This rotor has the wedge brake system. There is some tower paint on the rotor bell housing but does not impact operation.
The rotor was gone over in 2001 and regreased. Never a problem with it. Reason for selling is that it's no longer used. Since 2001, it's been used only for Field Day and then stored in the garage. Thing is, we never turn the antenna for Field Day so we'll simply clamp the mast down. This will help lighten the load when raising and lowering the antenna.
Works 100% although the indicator meter sometimes jumps around a bit when rotating. I've found this to be normal in practically every Hygain rotor, including the Ham IV and T2X series.
$235.00, includes packing, insuring and shipping CONUS. Or pick up local in Easton, Pa or Basking Ridge, NJ and save on shipping.
Give me a shout or email if you have any questions. Email is "sstepa at verizon dot net" or call 610-248-5097.