eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


eHam.net Classifieds Detail


[Classifieds Home]   [Configure]   [Help]   [Search]   [Add]  


Date Posted by Category User IP

2013-01-28 (UTC)

AC0DS

Components

ProtoBoard & PCB Construction Package - Sold!

I have several high quality ProtoBoards
available along with a collection of PCB
circuit pads, bus strips, component
mounting pads, etc. These are ideal for
prototyping and building a wide variety of
digital and RF circuits up into the UHF
region. All of these are new and
completely unused.

Qty 1 PadBoard 3U by Busboard Prototype
Systems. 100 x 160 mm. FR-4 board
drilled on 0.1 inch centers with plated
thru pads on both sides of each hole.
Drilled location for 96 pin connector.
Handy board for conventional leaded
components and DIPs. More info at
www.busboard.net.

Qty 2 PadBoard 3U-thin by Busboard
Prototype Systems. 100 x 160 mm. FR-4
board with square pads on 50 mil pitch
for direct mounting of most all SMT
components. Board is drilled every 4 pads
with unplated holes. Backside is a solid
copper groundplane. Ideal for
prototyping and building SMT projects.
More info at www.busboard.net.

QTY 4 RF PadBoard. These are my
favorite substrate for construction of RF
projects. 4.5 by 5.75 inch FR-4 boards
with unplated holes drilled on 0.1 Inch
centers. Backside is solid copper
groundplane. Top side has a square pad
at each hole location. Easy to pick up
grounds where needed from backside.
Can easily construct busses and
interconnects on topside with small gauge
tinned solid wire. Very convenient
component mounting. Iíve built several
receiver and test equipment projects with
these boards with excellent results.
Believe I purchased them from a company
called Dartec in the UK.

Qty 16 small FR-4 IC pads for ICs with 0.1
inch lead spacing. These allow soldering
of the ICs with extended pad for
attachment of other wires, components.
Variety of sizes to accommodate 8 to 16
lead ICs.

Qty 12 small FR-4 IC pads for SOIC
devices. These allow soldering of the SOIC
IC with extended and fanned-out pads for
attachment of other wires, components.
Variety of sizes to accommodate 8 to 28
lead SOICs.

Qty 1 small FR-4 1 by 2 inch prototype
board with holes on 0.1 inch centers.

Handful of assorted copper bus strips and
punched pads, etc.

Price for everything is $61 including USPS
Priority Mail shipping to your USA
address.

PayPal only, please. Contact me directly
via email if interested:
craig@powersmith.net


73 Craig AC0DS

This was marked by the originator on 2013-01-28 (UTC) as being sold.

Previous: TEN-TEC 1208 TRANSVERTER    More Recent: Bird watt meter slugs