FOR SALE WT-51, 51 foot Self-supporting, extendable, manual crank-up tower.
TOWER HEIGHT: Extended 51 feet (15.5M). Retracted 21 feet (6.4m).
TOWER SUPPORT: Self-supporting, no guys.
WIND LOADING: Engineering analysis indicates the tower will support 13 Square feet of projected area
at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.
DEAD LOAD: The maximum dead load is 300 lbs.
WEIGHT: The tower with the base weighs 355 pounds (161kg).
Tower is complete with a manual crank-up winch and hoisting cables.
The tower is designed to extend the tower telescopic sections uniformly.
With your purchase, a user manual one and a copy set of drawings and calculation is provided.
This tower has pulley frame on one face only. The lifting cable is 3/16 x 7 x 19 aircraft cable.
Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance, allowing more useful load to be installed on the tower.
WT-51 Manual, Drawings, Calculations
Ham M type rotator plate
Extra NEW Cable Kit for WT-51
ITEMS NEEDED: Rebar base. A replacement base from Tashjian Tower is RCB-37/51LT cost is $315.00
Also comes with a Mosley TA-33 Tri Band Beam. Ham IV rotator and 20 FT .025 wall mast.
Home made tilt over fixture.
NOTE: WILL SELL TOWER BY ITS SELF
This complete package new is over $3000.00
Asking $1,500.00 OBO Plus some help to take it down.
Unit to be picked up in Northern New Jersey
Please E-mail with ant questions.