A High Performance – Handheld Base Station Analyzer.
Please Note: This device was designed primarily for the Field Technician in servicing Cellular Base Stations, however it more then lends itself to cover Amateur Radio applications along with a learning curve.
Options included with this unit are as follows: 10A,19,25,27,31,51
Cables included are as pictured in photo.
RF engineers and technicians in the field need a lightweight, practical,
and rugged test solution that can perform all the measurements needed
for installation and maintenance of modern cell sites.
10 MHz to 4 GHz, 10 MHz to 6 GHz (Option 26): Return Loss, Cable Loss, VSWR, Distance-To-Fault, 2-port Gain, 1-port Phase, 2-port phase, and Smith Chart for detailed analysis, Spectrum Analyzer Outstanding performance from 100 KHz to 7.1 GHz, High Accuracy Power Meter Performs accurate RMS power measurements for CW and modulated signals, Channel Scanner Measure frequency, bandwidth and power of multiple transmitted signals. Create 20 custom channels to scan by
frequencies or channels. Bit Error Rate Tester (BERT) T1, FT1, T3, 2 Mb/s-E1 Capability to analyze if the problem is on the wireline or the wireless side. Bias Tee (Option 10). GPS (Option 31)
The GPS option is used to confirm and save the exact measurement, location
(longitude, latitude), date and time for each
measurement. Interference Analyzer (Option 25)
With its built-in low-noise preamplifier, the MT8222A with the interference analyzer option provides the ability to identify and
locate interfering signals down to –154 dBm, allowing technicians to better address the quality issues that affect user service. Channel Scanner (Option 27)
The Channel Scanner option measures the power of multiple transmitted signals,
making it very useful for measuring channel power of up to 20 channels in
AMPS, iDEN, GSM, TDMA, CDMA, W-CDMA, and HSDPA networks – all
at the same time. High Accuracy Power Meter (Option 19). Option 19 adds support for the PSN50 Sensor, which is purchased separately. T1/FT1 Bit Error Rate Tester (Option 51).