eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


eHam.net Classifieds Detail


[Classifieds Home]   [Configure]   [Help]   [Search]   [Add]  


Date Posted by Category User IP

2013-11-27 (UTC)

WA9ZOH

Test Equipment

adsl-108-71-65-225.dsl.ipltin.sbcglobal.net

Anritsu MT2222A

A High Performance Handheld Base Station Analyzer.
Please Note: This device was designed primarily for the Field Technician in servicing Cellular Base Stations, however it more then lends itself to cover Amateur Radio applications along with a learning curve.
Options included with this unit are as follows: 10A,19,25,27,31,51
Cables included are as pictured in photo.
RF engineers and technicians in the field need a lightweight, practical,
and rugged test solution that can perform all the measurements needed
for installation and maintenance of modern cell sites.
10 MHz to 4 GHz, 10 MHz to 6 GHz (Option 26): Return Loss, Cable Loss, VSWR, Distance-To-Fault, 2-port Gain, 1-port Phase, 2-port phase, and Smith Chart for detailed analysis, Spectrum Analyzer Outstanding performance from 100 KHz to 7.1 GHz, High Accuracy Power Meter Performs accurate RMS power measurements for CW and modulated signals, Channel Scanner Measure frequency, bandwidth and power of multiple transmitted signals. Create 20 custom channels to scan by
frequencies or channels. Bit Error Rate Tester (BERT) T1, FT1, T3, 2 Mb/s-E1 Capability to analyze if the problem is on the wireline or the wireless side. Bias Tee (Option 10). GPS (Option 31)
The GPS option is used to confirm and save the exact measurement, location
(longitude, latitude), date and time for each
measurement. Interference Analyzer (Option 25)
With its built-in low-noise preamplifier, the MT8222A with the interference analyzer option provides the ability to identify and
locate interfering signals down to 154 dBm, allowing technicians to better address the quality issues that affect user service. Channel Scanner (Option 27)
The Channel Scanner option measures the power of multiple transmitted signals,
making it very useful for measuring channel power of up to 20 channels in
AMPS, iDEN, GSM, TDMA, CDMA, W-CDMA, and HSDPA networks all
at the same time. High Accuracy Power Meter (Option 19). Option 19 adds support for the PSN50 Sensor, which is purchased separately. T1/FT1 Bit Error Rate Tester (Option 51).
Price $5,000
Contact: robertcharles0274@att.net

Email: **Please Login To send an email** Email this to a friend!
Previous: Ameritron AL-1200    More Recent: Ten-Tec Omni-D HF Trans.