eHam.net Classifieds Search Results

3/16 Galvanized Seven Strand Guy Cable

Have 6 rolls of 3/16 seven strand galvanized steel guy cable. Each roll 250 feet and ONE roll of 225 feet. The first six have not been opened but I used some from the seventh. Will take .20 a foot for the cable in full rolls only. Located in Bentonville, Arkansas. Probably pickup only but could meet someone if you want it all. I purchased it several years ago for an antenna project that didn't materialize. Has been stored in my shed since. STEVE HARMON, N9HGF steven9hgf@gmail.com

HD Thrust Bearing

Very nice heavy duty thrust bearing. 2 1/16" ID with 5 3/8" Ctr mounting holes. $50 plus shipping.

Wilson TT-45B Tubular Tower, Rotor Base, Raising F

Wilson TT-45B-extends to 45' and nests to 21.5',(see US Tower MA-40),Wilson RB-45 Rotor Base (see US Tower MARB-40),Wilson RF-45 Raising Fixture(see US Tower MAF-40)allows the antenna and tower to be tilted over and lowered to the ground, Hygain CDE CD-45 II Rotor, and Cushcraft A3 Triband Beam antenna w/A744 40 Mtr. add-on kit. All of these items were purchased new and installed for approximately 6 months and then taken down due to a move. All items have been stored inside since. All items show minimal wear(paper ID stickers are still on the antenna traps). All items come with original installation manuals, some sales receipts, and the rotor is in the original box. A local freight company estimated the freight to be about $400 however can vary due to distance. Weight on the TT-45B tower is 242#, the RB-45 Rotor Base is 75#, and the RF-45 Raising Fixture is 35#.Pricing is as follows: TT-45B Tower, RB-45 Rotor Base, and RF-45 Raising Fixture is $1850, CDE CD-45 II Rotor is $250, and the Cushcraft A3 antenna with add-on kit is $450 or the complete tower, rotor, and antenna package for $2400. I cannot sell the tower system components separately however would consider selling the rotor and antenna separately. I have many photos that can be e-mailed to interested individuals. I can assist with freight shipment however buyer is responsible for freight charges. Contact me by listed phone or e-mail at: vintagemx20@hotmail.com. Thank you, Logan Bailor-N0CQV

Model HDT-15KD

Roof aluminum tripod tower 15 Ft.,Model HDT-15KD.Fully assembled,with original instructions.No rust or any damage.$ 150.Prefer pick-up.Contact by phone:650/210-6469

TOWER PACKAGE DEAL

***SOLD PENDING PENDING PAYMENT/PICKUP***I have 5 sections of RG45 with a 4' concrete stub. The top of the Rohn45 has a custom made transition plate to RG25. In RG25 have 3 straight sections and 1 top section with a rotor plate and new rotor bearing installed. Also all bolts for the RG45and the 25. Some guy wire (unknown length), one torque bracket, commercial gin pole (unknown brand)that will lift the RG45, rotor and control box(unknown brand or model). Three guy anchor 8’ "dead man" poles. 165' 7/8" Helax with connectors and commercial Decibel Products DB-224 VHF. One connector on the 7/8" will have to be reinstalled. I’ll deliver anywhere in AR - OK - TX - LA for $ 2,500. Pick up and save, more pictures available. .......

ROHN 25G TOWER PACKAGE

100 FOOT Rohn 25G Tower System complete with base mounting plates rotor mount, top guide sections, work platforms, and guy lines as follows: (10) 25G 10' sections; (4) 25A62 Top Sections; (1) BPH25G Hinged Base Plate; (2) BPC25G Base Plates; (1) BAS25G Bearing Access Shelf; (1) ACS25G Rotator Plate; (3) WP25G Work Platforms; (4) R-GA25GD Tower Guide Bracket;(1) R-5DB25G Single Base Drive-In Base; (1) R-EF2545 Rohn 25 Gin Pole System. Over $5000 NEW. Excellent rust free condition, completely disassembled and ready for pick-up. Can be put in a full size truck bed. PRICE IS $2000. PICK-UP ONLY IN LAS VEGAS, NEVADA. Jim K7LYQ (ex-N4LYQ)

Rohn 45 G 10 'Base tapered Section

Wanted one 45 g Rohn tapered Base section for Insulator

4ftfiberglass antenna poles

I have a quantity of 4ft military surplus fibergasss interlocking antenna masts available. about 1 3/4 inch diameter and 1/4 inch thickwall By far the best antenna support pole I have seen. can hip 16 poles in one box via UPS 1.50 ea plus actual shipping. Local pickup ok in Holly Hill FLorida

Rohn 55 series 80 ft crank up tower

For sale of trade: 1 new old stock rohn 55 series 80 foot crank up tower. Manual winch,base, tilt over bracket and cables. Tower is new and has never been installed. $3000.00 neg. trades of similar valued amature equipment is welcomed. Let me know what u have.shipping not included. Delivery might be available for a fee. Buyer must arrange shipping if required. Pictures available upon request. Tower is located in new york, zip 11752. 73's kc2wbh

US Tower TX-455

Want to buy a center section for a 455.

Yaesu G-1000 DXA Rotor Controller

For Sale Yaesu G-1000 DXA Rotor Controller, ( control box only) like new condition! 100% operational (no problems ) no dents ,dings or scratches less then 1 yr old, very low hrs of operation (non smoking shack). Should also work with the G-800/1000/2800 DXA models I replaced this one with a Green Heron Controller for the variable ramp up/down speed and computer logging auto rotate features. Asking $250.00 firm plus shipping USPS Mo's ship next day/ Bank and personal chk's must clear prior to shipping ABSOLUTELY NO WESTERN UNION MO's accepted I will take Pay-Pal with some condition's and only with my PRIOR approval more photos available on requist E-Mail good in QRZ W7TG Tom Gracey

Aluminum Tower

Heavy duty 50 ft Aluminum tower for sale with rotor. This tower was built for military use and has extra sections which were not erected. Purchaser must take the tower down and the asking price is $500.00. Located in Jacksonville FL area at W4BWX QTH. Contact Ken via kenkingsnorth@hotmail.com

WTB: AB-952 extension tubes

Wanted: 4 AB-952 extension tubes

TX-455 US TOWER

55 ft crank up with lowering attachment to lay it down. Comes with elite force 5 el beam 20/40 and rotor. $1400 palm coast,fl.

Fulton 1550 Winch

SOLD SOLD SOLD New Fulton 1550 winch, never used. It was removed from a brand new TX- 455 tower before installation in September. $65 plus shipping email: ko4xj (at) arrl (dot) net

HDBX 48FT Freestanding Tower

48 ft freestanding crisscross design tower. Ham IV rotor & box. Trust bearing, etc. 200ft coax & rotor cable. Used 1 year, already down and ready to go! Pick-up only. Georgetown, Ky. $1,000

Stainless Steel 3/4" turnbuckles

Stainless Steel 3/4" turnbuckles I have 4 of these for sale. The 12" from eye to eye. $50 for all of them.

WTB: BX1A, BX2 FOR ROHN BX, HDX, HDBX

I'm looking for sections BX1A and BX2 from the Rohn BX tower series. Please reply with what you have, condition and your asking price. I am located in Northern Virginia. NOTE: USA only, no spammers, scammers or slammers please. Please reply to: KA4AZY -@- HUNTERS -.- ORG (chop the dashes out). Thanks in advance.

Rohn BX56 56'Tower w/14' Mast & Yaesu G-800SDX

I have for sale a Rohn BX56 radio tower, all sections are straight and solid with minor surface rust on a few sections. I would repaint anyway if I were to put it up. It is on the ground and in sections, it comes with a 14' 1 1/2" ID- 2" OD steel mast pipe which would give you additional heigth. This is a tapered section tower with riveted cross lattice and the sections will slide into each other for storage/transportation, these are (7) 8' sections. A fullsize pickup or 8' trailer will haul this minus the 14' mast pipe. I will help load sections for pickup. I'm asking $500. This is in very good shape and heavy duty. I also have a Yaesu G-800SDX Rotor w/wire and controller for sale for additional $300. Local pickup only, pics upon request.

Rohn 45

Rohn 45 SB45G short base section. New, never used. $60 plus shipping.

WTB: AB-577 Military Mast or similar

WTB: AB-577 Military Mast Looking for a military mast such as AB-577, AB-621, or similar.

Loos PT-2 Guy Wire Tension Gage

Gage has been used once from brand new. I need PT-3 to measure 5/16 wire. This model measures wire tension 3/16 thru 1/4 inch. Interpolate for non-listed sizes in that range. List new $134, Amazon $82. See data here: http://loosnaples.com/tension-gauges/professional-models. Know what your guy tension is for $60 you pay (modest) shipping.

BPH25G Hinged Base Plate Tilt Over

BPH25G Hinged Base Plate Heavy duty fold over plate that mounts in the concrete base. Has been drilled out for 3/4 bolts/nuts (( READY TO GO )) Excellent condition. $145.00 Plus $30.00 Shipping CONUS ONLY. Weighs about 25lbs.

WTB: AB-1009 Extension Kit

This is the extension kit for the AB-952

WTB Tri-Ex W51 Owner's Manual

Hi, I'm looking for an owner's manual for a Tri-Ex W-51 freestanding crankup tower. This is NOT the same as the model WT-51 at Tashjian Towers, although they are very similar. I'd be happy to buy the manual or pay for a photocopy and postage if you have one available. My email is n5vtu at arrl.net Thanks, Stephen N5VTU

Tri-ex LM-354

Good condition 54' crank-up tower taking it down shortly quite strong best bid over $600.00

H D HEIGHTS ALUMINUM TOWER

Selling a 120' heights tower, has a rohn 25 top section attached at the 120' top plate. Total height is 128.5'. It will self support to 80' . I guy it at 40, 80 and 120'. The bottom section width is 35" and the topmost section width is 26" . There are 15 Heights tower sections each 8' long plus the Rohn 25 top section bolted to the heights topplate. This is not a toy tower, make a serious offer. Heights Tower is still in business, so Check prices for new sections before making a low bid and insulting me. I am looking for around 4K hightest bidder gets it.

AB-952 Military Surplus Mast

A military surplus portable mast system. (Similar to AB-577 "Rocket Launcher") With accessories kit. Can arrange to meet within 75 miles or must be local pickup. $595 (This is a two-man carry item.) Email (kb3cvs@arrl.net) to arrange for purchase or to request more information. (Http://kb3cvs.com/information_links/TM11-5820-540-12-AB-952-section.pdf contains more information about AB-952)

NEW 25G Accessory rotator rotor Shelf

Bought for a tower that never went up. $55 shipped CONUS.

Andrew Grounding kit

Andrew 204989-2 Grounding kit for 7/8"cable. NOS $10 plus shipping or $80 for all 8 shipped.

WTB: Philystran

looking for either 1200 or 2100 lb Philystran appr. 100-300 FT

Hy Gain Gin pole model 140

Anyone have one for sale please? email nb2a@yahoo.com Thanks

Wanted : climbing harness

seeking Climbing harness for tower climbing what ya have ?

Crank Up tower wanted on LI,NY

Looking for a good used crank up tower here on Long Island,NY, between 40ft to 70ft,must be in decent condition,please tell me what you have and e mail me pics.

Rohn H-70

Rohn H-70 Telescopic Antenna Mast. New. Never been used. Labels still affixed. All Galvanized Steel. No Rust. Hardware Package Included. Extends to 64 feet & compresses to 11 feet 5 inches. Weight 74 lbs. Has 7 rolled edge guy rings which rotate to any direction on the mast along with 5 guy holes on each ring. PLEASE CHECK WITH YOUR LOCAL SHIPPER FOR SHIPPING RATES. Serious Inquiries Only. $215.00 negotiable. Contact: k4hmk1@gmail.com

WTB Wilson RB61B

WTB Wilson Rotating Base; for a MA61 tower.

WTB 30/50 ft crankup tower

I'm fed up of hurricanes and tropical storms and i need help, I'm looking for a 2/3 section 30 to 50 ft crank up tower to easily lower my steppir in case of meteo warning. i will pay additional freight to my forwarder in Hialeah FL, i will prefer a tower which is already in the FL area. it will be shipped to the island of st. Maarten NA-105 in the antilles. I evaluate every offer. thank you for your help Marco PJ7MF

American Tower AME25

American Tower AME 25 NEW/never been up,(left overs) 10 foot straight. 4 foot cut for base also fits Rhon accessories!! GIN POLE--$100.00 for all_ tower2011@myfrontiermail.com

rohn HBDX48

i have a rohn hdbx 48 free standing tower with mosley ta-33 ham iv rotor , buyer must remove also there is coax 200 ft that goes with asking 500.00

wanted : Rohn TB3 thrust bearing

seek new TB3 thrust bearing with hardware see photo : http://kollmanradio.com/images/ROHN_TB3.gif

Tower Climbing Belt and 30' Lanyard

Offering a light weight very heavy duty tower climbing belt with safety buckle and Miller 1/2" OSHA accepted 30' safety lanyard with factory installed spliced eye. Both the belt and the attached 3' lanyard are complete with large, heavy duty safety snap open/locking clamps and large opening quick connect belt receivers for instantly securing to, wrapping around, or through tower rungs. Belt fully adjustable to a 48" waist size. Shows no sign of wear or abrasions. A small tool pouch (upper left) is included. Ideally suited for alterate uses including mountain and rock climbing, (hunting) tree stands, as well as cave exploration. $75 shipped

FS: Andrew Connector Weatherproofing Kit

Andrew #221213 new Weatherproofing Kit for coax connectors and splices. Weatherproofing tape kits flawlessly seals the junction between two connectors provides a moisture seal. It not only protects the connection from water damage, it also prevents vibrations from loosening the connections. Each kit contains (6) rolls of 2-1/2" x 24" butyl tape, (2) rolls of 3/4" x 66' black electrical tape & (1) roll of 2" x 20' black electrical tape. $15 each kit plus $5 shipping, or 4 kits for $63 shipped. Thanks, Dave N3EJT 301 233-0910.

30 ft Rohn 20 tower

Used 30 Foot Rohn 20 antenna tower. Has light surface rust, needs a cleaning and paint job. I planned to bracket mount it and install a hexbeam on it, but found a deal on a larger beam, so I bought a Rohn 25 free standing tower. Consists of 2 ea 20G 10' straight sections, 1 ea 20AG 9' tapered top section, and a 5-6 foot base. Price is $75.00, pick up only. Paypal or cash OK. AB9VN