eHam.net Classifieds Search Results

MicroHam USB Microkeyer

Microham Microkeyer Voice/Digital modes interface, includes USB cable, three soundcard cables, and software. Manuals and Software/firmware upgrades available free on-line at http://www.microham-usa.com/downloads.html. Great condx, no issues. Shipped insured Conus - $185 with the radio cable, $165 without. Cable is Model DB-37-FT-1000D for a Yaesu FT-1000/D Thanks ... 73 ... Hunter K3IE

Rig Blaster - West Mountain

West Mountain Rig Blaster with software, manual, power supply, audio cable and original box. $65.00 plus $4.95 shipping (US)

Pactor II

PACTOR PTC II: This was made under license for Seawave. The only difference is the blue color of the face and the name. PActor II with Pactor III trial firmware. I have been using it for about 6 months and have just replaced it with a unit with the packet modem. Asking $500 shipped in the lower 48. Willing to work a trade for IC-746, IC-756, TM-700A. Have pics on request. 509-628-9467 or wx7k at arrl dot org

FS/FT: AEA PK-232MBX and MFJ-1276 TNCs

I have three TNCs for sale or trade. They all power on and light up, but I have not personally tested them or had them in service. I was told, however, that they do work 100%. Paypal or Money order OK. No international buyers (sorry!). Pics available on request. I will entertain trade offers – what do you have!? 1. AEA PK-232MBX PAKRATT: The first 232MBX is Serial 608XX - it is an 8/10 cosmetically. This unit seems a newer model as it has multi-colored LEDs. I do not know what firmware version it has. I do not have the manual or software but will try to supply a appropriate wall-wort power supply. Asking $70 shipped. 2. AEA PK-232MBX PAKRATT: I have a second 232MBX with Serial 398XX. It is a 7/10 cosmetically (has scratches on top of case). It has all red LEDs. I do not know what firmware version it has. I do not have the manual or software but will try to supply a appropriate wall-wort power supply. $65 shipped. *** I have two pigtail/cords for the PK-232, one wired to an 8-pin mic connector, the other to a 5-pin accessory connector. First come, first serve. 3. MFJ-1276: This unit is in very nice condition, about an 8/10. It comes in the original packaging with the manual, but no software. The 1276 comes with a wall-wort power supply and a cable to connect it to an IC-706. I do not know what firmware version it has. Asking $70 shipped.

RigBlaster Duo

RigBlaster Duo. Only taken out of the box and tested. Hasn't been used since purchased in March. Paid $349 new. Will sell $290 shipped in CONUS. PayPal preferred.

Kantronics Dataengine

I am wanting to buy a few Kantronics dataengines with or without modems.

***REDUCED PRICE***Tigertronics Signalink USB Pack

Due to the lowered selling price by a dealer I will ship it via USPS Priority to 48 for $110.00 Payment via USPS M.O. Please read details below. Thank you I don't enjoy working the digital modes so I'm letting go of my almost NIB Tigertronics Signalink USB as a package. Purchased from DX Engineering in May '09 and hardly ever had 10 Q's, well taken cared of that you can't tell it from a new one. It will come with the manual, CD, USB cable to PC, jumper wires for internal configuration, original box AND PLUS TWO (2) DIN interface cable for the FT-950 & IC-718. Save some bucks and the waiting time from the manufacturer....email me at ad5md@yahoo.com if interested.

Switchboxes

I have to switch boxes, there were used in a packet setup, box #1 3 15 pin connectors *VGA connectors* with a 5 pin din female below each one, there are 2 cables *apprx 6 foot long* that come with it. It is a 2 position A / B Box #2 is also an A / B bit it has 3 25 pin LPT connectors on the rear. Priced to sell, 20 dollars for both plus shipping Bill K4FX

DigiMaster USB MiniPro 2

The MiniPro is the interconection between computer and your transceiver.It will show the rigs front panel and let you control all of the rigs functions from the computer. It will allow you to operate PSK,RTTYand CW from your computer. All cables required for Icom rigs and an operating manual are included. price is $95.00 $125.. shipped. Just returned from The UK verified all ok.

micro KEYER II

$380.00 About a dozen hours of use on this ever so gently used microHAM micro KEYER II, deciding digital modes weren't my cup of tea. Purchased new in late October along with cable for my ftdx9000mp. Cable is not included and will at a later day appear on eBay. Buyer will need to purchase a cable for their specific rig from microHAM or homebrew a cable. (Unless you happen to be using the Yaesu ftdx9000mp/d/contest, we can work out a deal for the cable as well.) So for now I am selling just the micro KEYER II which comes with everything shown in the picture. USB cable, 3.5 mm audio cable (sub-receiver audio), RCA to RCA cable (PTT IN), coaxial 2.1mm/5.5mm power plug, and CD-ROM containing the microHAM USB Device Router program and documentation. Money order or possible PayPal respond direct to kq6i at arrl dot net

MicroHam USB Interface II

These USB Interfaces provide a solution to the lack of available Serial (COM) ports on laptop and newer desktop computers for controlling your radio. The USB interface II includes full optical isolation of all control signals (radio control, CW, PTT and Squelch) and high quality audio transformer isolation (with level trimmers) for audio to your radio's rear panel audio input and from the radio's constant level audio. microHAM USB Interfaces have built-in hardware support for your radio - you no longer need additional level converters like CT-62, IF-232, FIF-232, CT-17. The drivers include support for software CW keying (DTR) and PTT (RTS) - there is no need for additional interfaces. Unlike common mass market computer "USB to Serial adapters" our USB Interfaces are carefully designed for maximum immunity from strong RFI and at the same time be "RF quiet". Each data line is low pass filtered for minimum interference. Package includes: micro USB Interface II™, CD ROM with drivers, control software and manual, USB A-B cable, two sound card cables, and one Icom radio cable. You can read more at http://microham-usa.com/products/usb.html I will accept PayPal or money order for $145.00 shipped in continental U.S.A. You may reach me at [email] k9on@att.net or (630) 673-6704 after 6:00 PM CST

signal link sl-1

signal link sl-1+ sound card radio interface used for receive only $50 usps money order pob/k8len

AEA PK 900

AEA PK 900 Dual port with Pactor, no DSP. I bought new in 1995 from HRO. Version 7.1 firmware updated March 1996. Serial # 3180. Original box, manual and some cables. Good clean condition, have not used it for several years but worked perfectly. No terminal program software, think I used Packratt but not sure. This is a very serious piece of equipment and I cannot answer questions about how to operate it. The manual is very comprehensive. Used it originally with Kenwood TS440 and 2meter rig. Strongly advise you read the reviews on E-Ham before purchasing and understand what you are getting.Not a penny less than $270, shipped to lower 48 but would discount $20 if you pick up from south Mississippi. 73, de Mike, WM5DX

HAL RTTY-1 Tuning Unit

For Sale: HAL RTTY-1 rtty tuning indicator. Excellent condition. Includes manual. $75 shipped in CONUS.

RigBlaster Pro

Up for sale is a RigBlaster Pro. Includes all basic cables and manuel. It is in good condition. Asking $160 which includes S&H in CONUS. PayPal accepted.

Kantronics KPC3 +

Kantronics KPC3 + in excellent condition. TNC only, no cables ver 9.0 $160.00 shipped (to lower 48) bluesoftail98@hotmail.com

FS: MICROHAM USB III/K3 CABLES

I have a like new MICROHAM USB III Digital interface. It comes with the plug and play interface cable for the Elecraft K3 (Others are available or can be made). It has hardly been used and I am the original non-smoking owner. It comes with the original boxes and CD. It is only 4 months old. Read about it at: http://www.microham- usa.com/Products/USB3.html I will ship this unit in the Lower 48 States for $170. Payment via PayPal or USPS MO. If interested, drop me an email at: k2wo at arrl.net NO PHONE CALLS PLEASE!

DRSI Type 2 TNC's

Have 2 DRSI Type 2 (1200b TNS's) with spare modem chip. Requires ISA slot. Make offer.

Signalink USB Wanted

Looking for a Signalink USB with all original accessories. Need 13 pin Kenwood and or 8 pin Icom if available. Let me know what you have.

DV Dongle for D-Star from your PC

I have a lightly used DV-Dongle, it works great, come with USB pig tail, works for several platforms, latest drivers and software for your particular platform available from website as always being updated. Enjoyable way to listen and talk to repeaters across the world on the new Digital mode, not using as much since I upgraded my IC-2200 with D- star capabilities. Ron N9QGS Asking $160 shipped all 50 states priority mail. accept pay pal or money order. n9qgs@scottky.us

MFJ-1272MYV

MFJ-1272MYV TNC switch with modular plug for KAM and KPC-3. I pay for shipping. $40.00

Saratoga EZ-PSK 706/3

Saratoga EZ-PSK 706/3. I picked up a Signalink, so I don't need this anymore. $25.00 shipped. Would prefer paypal.

Kantronics KAM All-Mode

Lightly used. Version 5. In original box with cables, connectors and manual. Missing the 12V AC/DC transformer, however. Asking $75 plus $10 shipping (CONUS only). PayPal Ok.

Kantronics All Mode

KAM, Kantronics All Mode, with all cables ready, and manual, low use, price $98.00, only accept Postal Money Order

ICOM CT-17 CI-V Level Converter

The ICOM CT-17 CI-V Level Converter allows the connection of Icom radio's to a personal computer RS-232C port. In fact, up to four Icom CI-V transceivers or receivers can be connected via the CT-17 at once! $65+USPS SOLD 73