eHam.net Classifieds Search Results

Yaesu G-450A

$225 includes shipping. Yaesu Rotator & Controller G-450A - Complete - Never used - Includes 90 ft. of cable This entry-level rotator is perfect for small tribanders, or for VHF and UHF antennas. Its total rotation range is 360°.

wtb 4 wire control box with n,e,s,w on it

I am looking for a 4 wire controll box must work and have direction on it for my 2 meter beam thanks 219-898-8208 text with pic please

AR-33 Control Box

Looking for a AR-33 5 wire Control Box k4jns@hotmail.com

CDE-44 Rotator

Very good condition. Reconditioned. Have two. $140 each You Ship Tom

Yaesu G-2700SDX

Very nice heavy duty rotor complete with control box which has presets and 50' of cable with both plugs. Specs are very similar to the 2800. $750 plus shipping.

Creative Design RC5B-3 HD Rotator

RC5B-3 Azimuth Rotator by Creative Design - $300. It looks like new! Note that this series comes with the RC5A-2 Rotator Set controller. For more details see: http://www.cd- corp.com/eng/ama/rtt/rc5_eng.pdf RC5A-2, RC5A-3 RC5B-3 This series was produced for large-size antennas, high-yield materials are used for gears and other rotary parts in the rotor and a high-output motor is used to guarantee rotating torque of at least 16kg・m for RC5A and 22kg・m for RC5B type which is designed for rotating an extra large-size antenna offering powerful braking and rotating torque, and retarding torque of at least 200 and 250 respectively. With respect to the control unit, RC5A-x and RC5B are provided standard with the RDC circuit.

Yaesu G-800SDX Rotor w/wire 7 Controller

Yaesu G-800SDX Rotor w/wire and controller for sale at $250. Local pickup only, pics upon request.

Prop pitch rotators

Prop pitch rotators: I have several medium and one large prop pitch rotator all for sale. I have for sale extra electric motors for spares. All except one of the rotators and motors were never mounted or used. They had been stored in the original wooden crates that have slowly disintegrated. I used one medium prop pitch mounted inside Rohn 45G , controlled by an M2 RC2800PP digital control box, to effortlessly turn stacked yagis including a Hygain 205CA (5 element 20 meter yagi) and large Telrex 40M329 (3 element 40 meter yagi. The mast, thrust bearings, and many accessories were already sold. My friend, KC2FU, has another mast for sale if you are interested. Most of the tower sections were already sold. I still have some short and/or damaged pieces for sale cheap that can be easily repaired and used. They make good tower bases in concrete. I also have a medium prop pitch with a chain drive sprocket in a galvanized steel box that had been used to turn the base of a Tri-Ex 72 foot crank up tower. I already sold the tower, but the prop pitch is for sale now. I am downsizing, so the remining tower pieces, prop pitches, electric motors, M2 control box, accessories, and antennas are all for sale. They are all on the ground now, so you may inspect them. The prices are $500 for the large prop pitch including an electric motor, $350 for each medium prop pitch rotator including an electric motor, and $150 for each spare electric motor. The M2 RC2800PP is in like new condition and is for sale for $390. No sales tax. M2 sells new ones for $616. I need additional money for packing and shipping. I can take and e-mail photos. Visit or call me to discuss details. Bill Goodman, K3ANS, Easton, PA; office 610-253-2745, home 610-258-5063, or cell 484-241-6176.

Prosistel Model C Rotator Controller

I have for sale a Prosistel Rotator Control box, Model "C" for older AC motor driven Prosistel Rotators. Asking prices is $220 including shipping to 48 states. I will consider reasonable offers. Unit tested in manual mode with my broken (disassembled) rotator . Motor spins as expected. Position indication tested with a potentiometer. Works fine. I will include a mating connector for the back of the controller. This Rotator Controller has the following features: • Voice synthesizer • Keypad command entry • 9 memories • Selectable soft start and soft stop • +70° and –70° rotation overlap (total rotation range of 500°) • Manual command with reverse delay • RS232 computer control compatible • Selectable north or south stop

KENPRO KR- 500 CONTROL BOX

KENPRO KR- 500 ANTENNA ELEVATION ROTATOR CONTROL BOX..$55 WITH FREE ShIPPING..I ACCEPT PO MONEY ORDERS OR PAYPAL..CALL(270)929-7970 OR EMAIL ME AT wa4dc@roadrunner.com

YAESU G-5400B Package

Package includes G-5400B AZ/EL rotator with separation kit, Kansas City tracker/Tuner with cable, Realtrac software. All original manuals included. $450 plus shipping.

Selsyn Synchro Motors for Prop Pitch Rotor System

For sale is a pair of Bendix Aviation Corporation Selsyn Motors in excellent cosmetic condition. Taken from a working system. They are both labled Synchronous Repeater Type V, C74815 CAL-18400, AC 115V 60 Cycle and a date stamp of 1943. Shafts are 1/4 inche, keyed, they turn easily and quietly. They are the desirable 5-wire version. Use for your prop pitch rotor system, synchronous machinery, or replace that old gun turret in the B-17 you are refurbishing! Sold as is since they were not tested on the bench before sale. $50 plus shipping to USA.

Hi-Gain & others

Three Rotators, two control boxes and gear to modify rotator for homebuilt satellite tracker. First $50 plus freight

Ham IV Rotator

This HamIV has the Idiom Press Rotor-EZ upgrade as well as the RS 232 Serial Kit and LED meter lights. The upgrade allows computer control of the rotator, unstick reverse movement, brake delay and offset mode. The controller also has the meter lights replaced with the Idiom Press LED rotator meter lights. Works great with all popular logging programs that allow point and shoot operation off cluster spots. It can be operated with the paddles or use the control knob on the front panel to dial in the heading you want. $400.00/offer plus shipping.

Ham IV Rotor

Ham IV Rotor with 8 pin connector. Reconditioned/repaired ready to put up and turn your antennas. $275.00 Shipping extra. Ctrl box not included

HD-73 Alliance rotor &control box

HD-73 Alliance rotor annd control box all in very good condition , with low hours asking $175.00 plus shipping CONUS sold sold pending funds payment by US postal money order

Wanted: Create Rotator

WTB: I need a Create rotator, particularly the motor. Do you have one or the motor/controller at a reasonable price. Ship to Texas 77384 (bragassa@consolidated.net)

FS: MDS RC-1Y rotor controller

FS: one MDS RC-1Y Yaesu rotator controller. This small unit replaces the stock Yaesu control box. it works with many Yaesu rotators, new and old. serial interface to computer. see the MDS web site for details. asking $175 shipped inside USA. Jim/N1NK n1nk@cox.net

CDE Hygain Ham 4 Antenna Rotor

* * * * * P r i c e * * R e d u c e d * * * * * * * Now 325.00 plus actual shipping * * Hygain Ham 4 rotor in good working condition. Was professionally rebuilt by NRS and then put in storage, has never been used since. Has a brand new motor, directional pot, top casting, and terminals. Selling the rotor only, no control box or cable are included. Working perfectly, turns smoothly end to end. Includes all new stainless hardware package. This unit has the screw terminal type connector block. You can easily buy a control box for around 25-50 dollars. Anything including the old Ham-M boxes, T2X boxes or H2/3/4 boxes will all work with this rotor. I'm partial to the old H3 boxes myself. You can also build in your own brake delay circuit easily, if you like. Will supply that info to buyer on request. It's an easy, cheap, 'no holes' mod (or buy for 30.00 from NRS). Please contact me by email only, k3ky(at)radioprism(dot)com. (replace the 'at' and the 'dot' in the email address). 350.00 plus *actual* shipping cost (free packing and handling)- or local pickup. Only USPS domestic postal money order for this item. Prefer to ship to lower 48 only. Thanks! * * * * * Extra free item * * * * * Buy my as-new rebuilt Ham 4 rotor and I'll throw in an older, working, bakelite case Ham-M control box free! (You pay a few dollars extra shipping at actual cost) Yes, this does work with a Ham 4 rotor.

Alpha Spid

This is a one year old Alpha Spid RAK-1 Rotator. It is in excellant condition. Includes rotator, control, mouse control and base mount. Asking $725.00 plus shipping.

Yaesu G-800SDX Rotor & Controller

Great working condition Yaesu G-800SDX rotor and controller. The control box and the rotor both have the quick connect/disconnect connectors with them. With the original instruction manual. $150.00 if you pick up, Or extra $25.00 UPS to the lower 48 states if you want shipped.

CDE Hygain Ham 4 Antenna Rotor

Hygain Ham 4 rotor in good working condition. Was professionally rebuilt and then put in storage, has never been used since. Has a brand new motor, directional pot, top casting, and terminals. Selling the rotor only, no control box or cable are included. Working perfectly, turns smoothly end to end. Includes all new stainless hardware package. This unit has the screw terminal type connector block. You can easily buy a control box for around 25-50 dollars. Anything including the old Ham-M boxes, T2X boxes or H2/3/4 boxes will all work with this rotor. I'm partial to the old H3 boxes myself. You can also build in your own brake delay circuit easily, if you like. Will supply that info to buyer on request. It's an easy, cheap, 'no holes' mod (or buy for 30.00 from NRS). Please contact me by email only, k3ky(at)radioprism(dot)com. (replace the 'at' and the 'dot' in the email address). 350.00 plus *actual* shipping cost (free packing and handling)- or local pickup. Only USPS domestic postal money order for this item. Prefer to ship to lower 48 only. Thanks!

CDE Hygain T2X Tailtwister Rotor

* * * * * SOLD * * * * * (pending receipt of funds) T2X Tailtwister rotor in good working condition. Was professionally rebuilt and then put in storage, has never been used since. Selling the rotor only, no control box or cable are included. The direction pot on this one is a little scratchy around NE, otherwise working perfectly. Includes all new stainless hardware. This unit has the screw terminal type connector block. I can provide a photocopy of the manual to the buyer. You can easily buy a control box for around 25-50 dollars. Anything including the old Ham-M boxes or H2/3/4 boxes will also work with this rotor. I'm partial to the old H3 boxes myself. You can also build in your own brake delay circuit easily, if you like. Will supply that info to buyer on request. It's an easy, cheap, 'no holes' mod (or buy from NRS). Here's a link to another seller's Ham3 control box here on eHam right now: http://www.eham.net/classifieds/detail/339764 Please contact me by email only, k3ky(at)radioprism(dot)com. (replace the 'at' and the 'dot' in the email address). 350.00 plus *actual* shipping cost (free packing and handling)- or local pickup. Only USPS domestic postal money order for this item. Prefer to ship to lower 48 only. Thanks!