eHam.net Classifieds Search Results

Collins 75S-1 receiver

For sale $275.00. Receiver is in extremely good condition cosmetically and operates flawlessly. Receiver has optional cw filter and cw bfo crystal installed. It also has an additional 6BA6 tube installed between T1 & L4. Very professionally done. The original manual is included. UPS ground shipping, insured: $30.00. I welcome pick-up in Wetumpka, Alabama or can meet you within 100 miles of Montgomery, Alabama. Serial number is:1206. If interested e-mail me at wa4fcm@bellsouth.net I will be glad to call you just e-mail your number and best time to call. Hi-res photos can be e-mailed if you are sincerely interested.

National NC-100XA

WANTED: Speaker cabinet for my vintage NC-100XA radio. W4JDY W4JDY.FM18@gmail.com

Eldico SSB-100F

Eldico SSB 100F for sale. Excellent like new condition – physically perfect, may need an overall tuneup. I want $450 plus exact shipping cost. It is in Orlando, FL and local pickup is encouraged This makes an excellent match for a Collins 75A receiver. Can pickup at the Orlando HamCation!!

WTB: Collins 310 B-1 Exiter

Will purchase a good working Collins 310-B exiter. Please send details to larry.nx4s@gmail.com

FS: Hammarlund HQ-140X cabinet $50

Hammarlund HQ-140X cabinet $50. http://youtu.be/qYGH5WjySEI Heavy.. you pay shipping. Fernando N2FQ/6

Original Ten Tec DW-121 Enclosure

I have a pair of unused, still in original package, Ten Tec enclosures (think Argonaut 509). They measure approximately 12.5" x 10.5" x 4.5" (exterior dimensions). They are marked DW-121 (06-778 and 1010 in magic marker). I'd like $45 each, or $80 for the pair shipped CONUS.

WTB - LOAD & TUNE KNOBS FOR COLLINS KWS-1 TRAN

LOOKING FOR 1 OR 2 LOAD AND TUNE KNOBS FOR THE COLLINS KWS-1 TRANSMITTER THANKS DAVE W4PBU

FT-243 crystals

An almost complete set of AT cut crystals from WWII. Complete (except one) every 25kc from 5675kc to 8650kc in the original Signal Corps case CS-137. The exception is #297 @ 6350kc. I have replaced this missing one with a 1000kc crystal from Bliley. I have spot checked a number of these crystals and they worked except for the missing crystal in the series. There is a total of 120 crystals. $250 including shipping within the US.

Central Electronics 20A Transmitter

From an Estate sale… Central Electronics 20 A Transmitter. In GREAT shape for the age. The transmitter will produce RF using a crystal. I loaded it up on 80 meters. This would be a GREAT transmitter for your antique amateur radio collection. Works 160-10 meters, SSB, CW, AM, & PM. Any questions, please EMAIL me. Asking $50.00. Buyer pays actual shipping from North Canton, Ohio or can be picked up locally..

Vintage 60's home brew rig

Vintage circa 60’s Home Brew 6146 rig CW – 80, 40, & 20 meters 12BY7A Oscillator Xtal controlled ( no xtal supplied ) Aluminum chassis and front panel Perforated aluminum top & side panels Photos on request Asking $75 Email sgt88@atlanticbb.net

Collins R-388 or 51J Receiver

Looking for a nice Collins R-388 or 51J receiver Ken w3kmp Ken41@windstream.net

WTB: Gonset Communicator II for 2 meters

For nostalgic reasons, I would like to buy a grey Gonset Communicator II transceiver for two meters, preferably in clean, working condition. Let me know what you have and your price. 73, Bill NZ5N billdz.geo at yahoo.com

Heathkit DX100 PARTS

FOR SALE: DX100 Parts / updated list as of DEC 18, 2011 QTY 4 - 120 uF at 450V DC Capacitors QTY 1 - 20 + 20 + 20 uF at 450V Capacitor QTY 2 - Switch, plate ON-OFF QTY 1 - Switch main power ON-OFF QTY 1 - Bleeder resistor - 15 K plus 15K-ohms QTY 2 - 10K at 10 Watts resistor QTY 1 - Drive level potentiometer 25 K at 4 watts with shaft QTY 1 - Ceramic feedthru and coil for underside of 6146 tube feed from driver stage. QTY 1 - Driver coil assembly, bandswitching QTY 4 - 1625 Plate Caps - ceramic QTY 4 - 1625 socket, 7-pin QTY 2 - 5U4 sockets QTY 5 - ceramic octal socket for 5V4 tube etc. QTY 1 - Sub-chassis for 6146 tubes with bracket, tube sockets etc. QTY 1 - RF Final tank coil assembly QTY 1 - Loading Variable Capacitor, 0 - 250 pF QTY 1 - Plate Tuning Variable Capacitor, 0 - 150 pF with shaft extension QTY 2 - Driver Tuning Variable Capacitor, 0 - 100 pF with shaft extension QTY 3 - Mode Switch - AM, CW etc. QTY 1 - VFO control shaft and bushing - 3/4" QTY 2 - Meter selector switch - rotary QTY 1 - Heathkit DX100 - Multi-way crystal socket assembly on metal subchassis for DX100 - holds up to four FT243 crystals. QTY 1 - CW Key jack QTY 2 - Audio input jack assembly with bracket, 5 capacitors, 3 resistors, terminal strips etc. QTY 2 - Audio Gain potentiometer for microphone input level QTY 1 - AC Input filter assembly QTY 2 - Accessory jack assembly with coils QTY 2 - AC power cable with fused plug BOX OF TUBES: 5U4 X 3 OA2 X 3 6AQ5 X 1 12BY7A X 5 5763 X 1 12AX7A X 6 12AU7A X 2 6AL5 X 2 6AU6A X 1 Various couplings, control shafts and small parts, red bezel lamp glass, etc. 2 bags of small hardware parts etc. Several extra capacitors and odds-ends such as 0.1 uF at 600V DC caps etc. For details and pricing - see web page: http://www.af4k.com/miscpart.htm 73 - Brian Carling, AF4K E-mail: af4k@hotmail.com

Vibroplex Champion Bug

Vintage Vibroplex Champion semi-automatic key (Bug) serial number 218118. This is from about 1960 and the Champion model was discontinued about 1979. One counterweight. Cosmetically I would rate it a 9- with a bit of corrosion. Asking $75 plus $10 shipping. You can pick it up locally in San Diego to save the shipping. Email or call (619)840-8736. Thanks. 73. Joe af6ni@arrl.net

FS: KENWOOD 250 HZ FILTER FOR TS520/R599

This filter is no longer being made. 3395Khz center and 250Hz BW. You can replace a stock TS-520 filter with this and in the R-599 receivers you could either replace the stock CW filter or put it in the AM slot if you do not use AM a lot. $85 shipped. Payment via USPS Money order Dale W4OP

Central Electronics MM-1 RF Analyzer

Central Electronics MM-1 Multiphase RF Analyzer - $290 plus shipping. This is a clean unit. Their is a trace but the focus does not work so this most likely needs some new caps in side. Cosmetically looks good with a few minor scratches. No extra holes and all of the correct knobs. Service and restoration notes for the MM-1 can be found at http://www.ce-multiphase.com/tech-info-mm.html. Please e-mail me for additional photos.

T-599D, R-599D Kenwood

I have alot of parts for sale for the Kenwood twins. Knobs, meters, front panels, interconnect cables, you name it, I mite have it. Also have the matching external speaker for $60.00 plus shipping. What mite you need. Regards, Gary

GONSET TWINS G66 G77 + PS

For sale GONSET TWINS G66 with AC DC power supply G77 with AC DC power supply with MODULATOR. I have not run them on 12 V DC. Only AC. They come with both manual all cables and 3 6Dq6 tubes These are in good condx but they are old so sold as is For $275 plus shipping and insurance. The G66 with ps and, G77 will be in one box at 28lbs, the TX ps with modulator cables and 6DQ6 tubes in another box at 25lbs from 01568. I ship parcel post only. I will send you total, payment via bank check or post office money please look at the pictures,i will send more pic's to you you can E mail me for my phone number if you need to talk to me about these. Look at my feed back on E bay its under my call w1jz.. thank you mike

Hallicrafters SX101A

Good condition and working fine. Has crystal calibrator, new caps and all new LED panel lights. New Manual. Local east TN only. Will meet halfway. $150

Heathkit SB-634

Heath station console in full working condition. I have the original construction manual for it. Case in great shape, one LED substituted for the Identify lamp. Back has had hole drilled for??? Digital displays take about 1 minute to light up when cold but come on instantly when warm. This unit has a Power/SWR meter, a telephone patch, a 10 minute ID timer, and a digital clock. All parts are operational. This was in my shack until I sold the matching equipment. Great if you want to complete you green Heathkit station. $100.00 o.b.o. Actual shipping costs are additional.

DRAKE MS-4 SPEAKER ( PRICE REDUCED)

DRAKE MS-4 SPEAKER. Speaker sounds great. Front panel in good shape with a few scratches on the cabinet. $60

COLLLINS R-388A or 51J-4

The R388A/URR a-la 51J4 general coverage receiver covers 0.5 thru 30.5 MHz AM/SSB/AM. It is similar to the R-388 a-la 51J3 except sports Collins mechanical rather than LC IF filters for state-of the-art selectivity, even today! Has documented product detector and AGC mods so it works great on SSB; they are switched in via relay whenever BFO is selected. The IF filter bandwidth is selectable independently of AM/SSB/CW mode for greater versatility. The 6KHz position makes eSSB sound HI-FI! A seperate crystal filter is available for use as a carrier notch or CW peaking filter. This is a very fine shortwave radio that puts most solid-state receivers to shame! All tubes were verified good on a HICKOK 6000 tester, gear train lubricated, and full electrical alignment was performed in 2009. Includes matching cabinet. $400 or consider trade toward Kenwood TS-950SDX. Call 417-659-8088 for details, leave message. PICKUP-UP ONLY!

Vintage CQ Magazines and Radio Handbook

Vintage CQ magazines. Three years of CQ as follows: • 1948 (3rd year of publication.) 11 issues, missing December, 1948 • 1949 (4th Year) 12 issues, complete. • 1950 (5th Year) 11 issues, missing September, 1950 All are in very good condition with complete covers and good bindings. Asking $12 for each year or the Radio Handbook plus $5 Media Mail shipping for each. If you order multiple years at once I can reduce the shipping. PayPal accepted and preferred, otherwise postal M.O. You can pick it up locally in San Diego to save the shipping. Email or call (619)840-8736. Thanks. 73. Joe af6ni@arrl.net

Narco VT-4

Battery powered emergency transmitter. 2" aircraft panel mount. Transmitts on 121.5 for up to 8 hours. Perfect for an ultralite aircraft as it weighs 10oz. PayPal only. $25.00 OBO. glanter@pldi.net

FS: Kenwood T-599D/R-599D parts

I have a bunch of extra parts for the T-599D and R-599D Kenwoods. I also have the matching speaker, $60.00. Interconnect cables, front panels, boards, knobs, the list goes on and on. Email me for a complete listing of the extra parts I have. Regards, Gary

Johnson Viking Ranger *COMPLETE RESTORATION*

This transmitter is completely restored inside and out. With a vastly improved T/R relay, hi-fi audio circuit and power switching to enable the Ranger to drive a modern amplifier, this unit is probably the best looking and working Ranger on the planet. To give you an idea as to the attention to detail paid during the restoration, even the nuts and bolts were polished to a high shine! Truly collector quality, the transmitter will be professionally packed by UPS and shipped to your door anywhere in the lower 48 for $1050 OR if you want to save the estimated $150 to properly pack, ship and insure the unit, you can pick it up at my QTH for $900 and see it in operation! PayPal is preferred with an additional 3% added OR CASH or a BANK CASHIER'S check will get the job done also. Serious buyers only please. Picture on request with email address. Thanks!