I’m looking for pickup truck owners who would be willing to provide measurements for, and feedback on, three prototype heavy-duty brackets for mounting antennas to pickup beds.
The brackets are: (1) front bed wall bracket with lay-back feature for large screwdriver/motorized antennas; (2) stake pocket bracket for large antennas; and (3) long bracket for multiple antennas that extends across the entire width of the bed and is attached to two stake pockets.
Your input would help me to obtain information on a variety of makes and models of trucks, and to get feedback on what may work well, or not, on your particular truck. I’ve gotten some information from manufacturers’ web sites, but additional “real world” information is important for good product design!
If I get sufficient measurement information, I’ll post it on my web site Downloads page as it may be useful to others.
If you would be willing to provide information, please click on this link (http://www.repdesign.us/gpage8.html
) to my web page which has the measurements I’m looking for and descriptions with diagrams of the three bracket designs. On this page I also have a link to an on-line Feedback Form that you can use to provide as much or little of the information as you like. You can also email or phone me with the information if so desired. My contact information is linked on this page as well.
Thanks in advance to those who would be willing to provide information, and it’s much appreciated!
Dick Post, N7EMW