Yaesu FP-301D & FT-301D

VE7PBY

Member

Posts: 6

« on: December 27, 2007, 07:56:46 PM »

Can anyone recommend a good repair shop for this type of radio.

My Father-in-law gave it to me, and it does not appear to be working properly so I would like to get it checked out.

Cheers


	Logged

W9GB

Member

Posts: 2600

RE: Yaesu FP-301D & FT-301D

« Reply #1 on: April 22, 2013, 05:39:08 AM »

Earl Andrews, VE3AB in Ontario Canada has parts and can test your plug-in boards.
http://www.earlandrews.com/FT301A.html


	Logged

K8AXW

Member

Posts: 3692

RE: Yaesu FP-301D & FT-301D

« Reply #2 on: April 22, 2013, 10:06:41 AM »

GB: John, wonder what the hells going on with these 301Ds crapping out at the same time? Planned obsolescence with a timer chip?


	Logged

W9GB

Member

Posts: 2600

RE: Yaesu FP-301D & FT-301D

« Reply #3 on: April 22, 2013, 06:22:31 PM »

... or everyone cleaning out their basements, garages, and closets at the same time.

The TIL306 / TIL308 is known component issue.
That part was used in RCA COSMAC ELF (1802), featured in August 1976 Popular Electronics
http://en.wikipedia.org/wiki/COSMAC_ELF

greg, w9gb


« Last Edit: April 22, 2013, 06:29:40 PM by W9GB »	Logged

K8AXW

Member

Posts: 3692

RE: Yaesu FP-301D & FT-301D

« Reply #4 on: April 23, 2013, 08:53:29 AM »

GB: John....Greg...... sorry.... I'm still losing it! Roll Eyes


	Logged

W2WDX

Member

Posts: 188

RE: Yaesu FP-301D & FT-301D

« Reply #5 on: April 24, 2013, 01:00:11 AM »

Lots of electrolytic caps in these radios, all about at the age where they are about to fail or have failed already. Recapping every electrolytic on every board and in the chassis is almost a must do on these at this point. Otherwise a great little radio, I own one, and the FT-221R 2m version with a Mutek board and external tone generator. Both have been completely recapped and now work perfectly.

John, W2WDX


	Logged

http://www.qsl.net/w2wdx/

Pages: [1] Go Up

« previous next »