Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: Ultra high quality VGA cable?  (Read 2248 times)
VA2FSQ
Member

Posts: 507




Ignore
« on: May 17, 2012, 02:56:56 PM »

Does anyone know where I can get a top quality VGA cable of 10' in length?  I've already tried some "High" quality ones including a 50$ monster cable and it is not good enough. a 6' one is ok but I need 10'
It is a pretty noisy environment. It is running from my Elecraft P3 SVGA to a frame capture board on my computer.  It has the usual radio, amps, etc in the way.  When I go to the 16' Monster cable I get some jitter in the signal which doesn't exist even with an el-cheapo 6' version.
Thanks in advancce
Logged

VA2FSQ
K9IUQ
Member

Posts: 1621




Ignore
« Reply #1 on: May 18, 2012, 10:10:39 AM »

Buy and use some High Quality ferrites on the cable.

Stan K9IUQ
Logged
TANAKASAN
Member

Posts: 933




Ignore
« Reply #2 on: June 02, 2012, 12:14:34 AM »

You could always make your own. Start off with two connectors and thirty feet of high quality 75 ohm coax for your RGB signals then use a ten foot length of shielded ethernet cable with the plugs cut off for the rest of the connections.

Tanakasan

Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!