Wouxun KG UVD1P Programming

[N8HO]

I recently purchased a Wouxon KG-UVD1P dual band HT from Radio City.  Trying to program the radio using the instructions in the manual was very confusing.  I tried to return the radio, but was told a hefty restocking charge would be assessed.  I obtained a programming cable and software, but still no luck.  I continue to receive a message when trying to "write to" the radio that it can not be found.  Any help will be appreciated.

[KK6AIW]

You have to choose the correct com port number. Clink on link and follow steps
http://theseventhunders.com/tut/wouxunTUT/wouxuntut.pdf

[K7DB]

Visit the Yahoo group http://groups.yahoo.com/group/KG-UV_Commander/ for info on using the great (and free) Commander software.

David

I recently purchased a Wouxon KG-UVD1P dual band HT from Radio City.  Trying to program the radio using the instructions in the manual was very confusing.  I tried to return the radio, but was told a hefty restocking charge would be assessed.  I obtained a programming cable and software, but still no luck.  I continue to receive a message when trying to "write to" the radio that it can not be found.  Any help will be appreciated.

[KK4DHD]

The Commander software is WAY better than what comes with the programming cable. 

[NA4IT]

The direct link to the KG software is http://www.kc8unj.com/kguv.html.

[LA9XNA]

See in the manual about how to set the radio in cloning mode.
That is what I had to do with my Wouxun KG-688 to be programmed.