New Software to program the Icom IC-7000

[KD8MJR]

I just heard about this on the reflector and I know that people have been looking for it so I figured you guys might be interested.

It's called "Ice" and it ONLY works with the IC-7000.

The forum
http://scannow.org/forum/index.php/board,83.0.html

The installation file
http://sixspotsoftware.com/icecomm1.01.msi

I scanned it, checked out the msi file and found no viruses so I installed it and it does run but I don't have my 7000 hooked up so I did not test it fully.  People say it works and does program the memories but is still in the Beta stages.

Maybe you guys can sign up to his forum, try it out and give him some feedback and encouragement.    I am not a 2M or net guy so programming all the memories is not really useful to me but I know many eHam users will love having software to make the job easier.

A big thanks to W3AHL for letting me know about it.

73's
Rob
KD8MJR

[KD8MJR]

Anybody try it?

[WX9DX]

I tried it and lost an hour of my life screwing with it. It does not function. Starts out with errors and when you ignore the warning of the error it will not see the radio. It's junk>!     You need to remove this Topic so no one else try's it!