Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: FT DX 3000 carrier power?  (Read 5068 times)
K6KKR
Member

Posts: 4




Ignore
« on: August 16, 2014, 04:35:06 PM »

Operator convenience issue: The only way I've found to change carrier level on this rig while operating in USB or LSB is to switch to any mode beside USB or LSB, turn the PROC/CAR knob then set the mode back to USB/LSB. Is this correct? I'd rather do it with less fiddling. If I turn the PROC/CAR knob in USB/LSB it changes Proc Level.

73, Dave K6KKR
« Last Edit: August 16, 2014, 04:39:55 PM by K6KKR » Logged
K2GWK
Member

Posts: 534


WWW

Ignore
« Reply #1 on: August 16, 2014, 05:14:27 PM »

Operator convenience issue: The only way I've found to change carrier level on this rig while operating in USB or LSB is to switch to any mode beside USB or LSB, turn the PROC/CAR knob then set the mode back to USB/LSB. Is this correct? I'd rather do it with less fiddling. If I turn the PROC/CAR knob in USB/LSB it changes Proc Level.

73, Dave K6KKR

I may be wrong but I seem to recall the latest firmware upgrade address this.
Logged

Guy
Lawn Guyland, New York

K2GWK Website
KA4POL
Member

Posts: 2125




Ignore
« Reply #2 on: August 16, 2014, 09:57:08 PM »

GWK is right. Firmware Main: Ver. 1.19 (08/07/14) Allows the TX power output to be adjusted with "PROC/CAR" knob in the SSB modes.
Logged
K6KKR
Member

Posts: 4




Ignore
« Reply #3 on: August 27, 2014, 09:32:45 PM »

Thanks. I'll try new firmware.

Dave
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!