|
|
|
48
|
eHam Forums / Elmers / KT34XA looking for plans
|
on: July 22, 2005, 03:16:59 AM
|
|
Hello.
I`m looking for technical drawings, plans with dimensions of parts for this antenna. I bought incomplete one to rebuild. Anyone can help?
Thanks, Mike
|
|
|
|
|
49
|
eHam Forums / Mods And Repairs / TS-870 eproms
|
on: April 16, 2005, 04:32:55 PM
|
|
Hello.
I`m looking for newest eproms for my TS-870. Maybe somebody got it, can make a dump of it, and send me as bin, or hex file?
Thanks, Mike
|
|
|
|
|
50
|
eHam Forums / Elmers / TS-870 eproms
|
on: April 16, 2005, 04:32:31 PM
|
|
Hello.
I`m looking for newest eproms for my TS-870. Maybe somebody got it, can
make a dump of it, and send me as bin, or hex file?
Thanks, Mike
|
|
|
|
|
55
|
eHam Forums / Computers And Software / PC keeps "hanging" even though reformatt
|
on: September 06, 2004, 08:52:30 AM
|
|
Check temperatures on ram, chipset (notrhbidge), temp of processor. If it is overcheating it will cause hanging 100%. Check chassis, maybe there is not enough free space for cold air circulation? If it is overcheating try to add blowing fan at the front of chassis, another on the back for removing hot air from inside.
Also good is to remove empty bay cover in a front to let fresh air flow inside.
Maybe there is a dust in fan/radiator of procesor? Also 250 megs of ram is too small for XP to run smooth. XP after reboot takes about 160-190 itself. I`m sure uoy run some additional programs during startup and it takes more and more ram. 512 is minimum IMO. I got 1024 in my PC, and XP with all applications is running fast.
Mike
|
|
|
|
|
57
|
eHam Forums / Elmers / Hairpin match, yagi plans
|
on: June 13, 2004, 09:01:09 AM
|
|
Hello. I`m building 5 el 20m yagi, and i would like to match it with hairpin. Can anyone pass me a information how to calculate it? Maybe direct feeding will be better? Or gamma match? Can you share your opinions? Maybe someone know where I can find materials about factory beams, dimensions etc to build a copy of mono- multiband yagi.
Thanks for any help, Mike
|
|
|
|
|
59
|
eHam Forums / HomeBrew / Hairpin match
|
on: June 13, 2004, 08:04:22 AM
|
|
Hell. I`m building 5 el 20m yagi, and i would like to match it with hairpin. Can anyone pass me a information how to calculate it? Maybe direct feeding will be better? Or gamma match? Can you share your opinions? Maybe someone know where I can find materials about factory beams, dimensions etc to build a copy of mono- multiband yagi.
Thanks for any help, Mike
|
|
|
|
|
Loading...
|
Show Posts
