Hi!

Where can I buy Hustler G7-144 vertical in europe?
I dont like to buy in USA because antenna price is 230 $ and shipping cost around 300$ to Hungary.

Thanks
Zoli

Wich is the best 144Mhz vertical(more gain,longest)?

1.What is a main problem with G7-144?

2.Which is the best VHF vertical antenna?

Thanks
           Zoli

Thanks for information!

I found 15 years old Hustler book and G7-144 is 1kw in FM.On website is 600Watt.

Thanks
            Zoli

Thanks for information!

Is it easy to tune for 145.0Mhz?
SWR is normal in 2Mhz bandwich if you measured with 100W?

Thanks
            Zoli

Hi all!

Hustler G7-144 is a best vertical for 144Mhz?
I like to buy this antenna or Diamond X-700.Who tested?
Difference?

Thanks
             Zoli

HI!

I like to ask you:

If you rotate SQL on top of transceiver(rubber antenna on it) where is SQL closed?

I realised that one of my IC-02 has this at 10 clock position,other IC-02 has 1 clock position.
I think something wrong,same component damaged?
No adjustment possibility.

Thanks
              Zoli  HG5AZR

Hi all!

I have two strong repeater:
one is on 145.600Mhz (original frequency) with 9+60 and I hear it around 1mhz up
with Signal 0.5(rfgain not used)
if rfgain is counterclockwise(used) on 145.600Mhz  S meter shows 9+40

but other stronger repeater is on 145.675Mhz (original frequency) with 9+60
and I hear it around 1mhz up with Signal 9(rfgain not used)
if rfgain is counterclokwise(used) on 145.675Mhz  S meter shows 9+60 and
clockwise also 9+60,no different

1.Maybe repeater is strong or sure that radio has a failure?

2.If you put a sign from signal genarator to IC-275 on 144.000Mhz nothing to
hear between 141.000 to 144.000Mhz in FM mode in 1khz step searching on
IC-275?Where?
On 144Mhz must be a very big test sign(if used rf gain to test signal strong
on s meter must be 9+60)
At test signal on 144.000Mhz must be 9+60 and used rfgain also 9+60.
In case I hear also with S9 1mhz down around 143Mhz

Thanks
                 Zoli

 1.Do you suggest to rewire Data Level pot to PBT in radio?

 2.In service manual where is data for lamp?

Thanks
               Zoli HG5AZR

Thanks for it!

1.How do you know that lamps are 60ma?Where is a servise manual?

2.Do I need yellow plastic case around lamp?What is the funktion,only colour and only heating reducing ?



Thanks
                 Zoli

Hi!

I like to buy TM-255E from JOSE LEGEREN but I am afraid from this man.
I think he is a scams?

Thanks
                 Zoli

Hi All!


1.I like to replace all lamps because burned out.How can I do it step by step?

2.I like to replace Notch pot.How can I do it step by step?

Thanks
                 Zoli

Hi!

How can I repair IC-02E ? B813A and B812 green ribbon cable is broken.How has defect IC-02 radio?

Thanks
              Zoli

I think from left side:1.input, 2.bias,3.DC source,4.output.
In service manual has nothing about it,no information for pin connection ,only size of modul.

Thanks
                Zoli

DMM was in 20V DC and shows -0.45V DC.
I repeated with other DMM but same result.
I measured mikroamper( DMM was in 20 mikroamper) today between ground and pin3 and DMM shows -1.6 mikroamper.

Thanks
                 Zoli