Anyone out there using the Golden Eagle amp...377XL, which runs up to 500 watts on 160, and about 300 on 10M. Any info good bad, or indifferent wud be appreciated. Tnx...Jerry W7TNS   w7tnsatw7tns.us

Bought the 1275 interface recently. NOT satisfied with the ir understanding of basic operations of the software they give out. While shareware, it wouldn't take much for their techs to be a bit up on it!  Tnx! de Jerry W7tns

Have run d104 and 746 w/o problems at all, with a Heil 5 cartridge in it. Got the correct info direct from Bob Heil...esy to do with that cartridge, and vy gud audio reports. Hope that helps...Jerry W7TNS

Tnx...At present I cannot get interface/computer to xmit. Spoke to MFJ tech today, and he suggested trying the original hand mike. I will do that tonight. But, the no xmit problem is not solved at tpresent, so that is my biggest problem. If you think of anything else, pse let me know...73, Jerry W7tns

Tnx for the reply to my request! I can receive all ok, but cannot xmit. Seems I have a "warbling" sound in my mike audio if I key the mike. Other than that, nothing keys the xmitter in any mode. Have tried every COM port in the software to no avail. Am running a D104 with heil cartridge, so Bob Heil told me to run the comp full time w/ a specific mike gain for that cartridege. Audio is super w/o the interface. Any help would be appreciated. Am using MMSSTV software and also Mixw2. Tnx!
73...Jerry W7TNS

I am trying to run an MFJ1275 Sound Card Interface w/ an Icom 746 original, with no luck. If you are having success w/ this setup, could you please email me w/ any/all settings. Thanks in advance for your help! Jerry W7TNS@W7TNS.US