|
|
 Show Posts
|
|
Pages: [1] 2 Next
|
|
3
|
eHam Forums / Computers And Software / RE: TM-V71A: Programming cable and software
|
on: October 22, 2012, 06:17:17 AM
|
|
Jack
I've played with a lot of RTSystems cables and software, but not like you are wanting to do.
I know that their usb>serial cable works with different radios/software, but that is a horse of a different color.
I think for you(if are only going to use kenwood software) is to buy kenwoods' PG-5G cable, which is a serial port cable. If you have a USB only computer,RTSystems above cable will get you there.
sorry I could not be of more help, but I would hate to steer you wrong with the usb to radio cable.
Mike
KC9BUH
|
|
|
|
|
6
|
eHam Forums / Mobile Ham / RE: Nissan 350Z
|
on: December 05, 2010, 06:51:21 AM
|
|
HI Fred,
after everyone quits comparing " how much bigger mine is" I for one would like to know what solution you've come up with. I have thought about buying a 350z at different times and wonder about antennas and radio mounting solutions
Mike
KC9BUH
by the way I have used UHF/NMO Hole/Lip mount antennas systems. depends on the cirumstance.
|
|
|
|
|
7
|
eHam Forums / Computers And Software / RE: Kenwood MCP-2A Programming Software
|
on: September 07, 2010, 05:02:53 AM
|
|
Sir
Go to rt systems web site and download "find com part"(it will be listed under FAQ)
plug in your serial port adapter and run this program.it will list the portsthat are avalible.
What I have run up against is a lot of program/radios require com port 1. You may have to swap usb ports to find the right one.
not to promote rt systems but I would buy their serial port conveter and run it.I have no problems with it.
kc9buh
|
|
|
|
|
8
|
eHam Forums / Computers And Software / RE: Working USB to serial adapter for rig control on Windows 7
|
on: September 02, 2010, 02:21:57 AM
|
|
windows (all late model versions)
RT Systems usb to serial converter
RT systems software(s)
icom software
ham radio deluxe
other radio control software
ft-950
ft-897
ft-857
ft-8900
ft-8800
ft-7800
ft-1500
ft-60
vx-170
vx-150
icom-121s
kenwood t?-700
countless others
I have tried ebay usb to radio cables(no luck)
NEVER had a problem with RT System's converter
SO if i say something is bad,ok,good or the best you really should listen and not chastise.
yes I should have been in more detail but I hate typing.
|
|
|
|
|
11
|
eHam Forums / Mobile Ham / antenna conversion
|
on: July 23, 2008, 05:30:16 PM
|
|
Thank you sir for responding to my question. That makes sense to me,so when the time comes I'll try it.
Mike
KC9BUH
WQFR960
|
|
|
|
|
12
|
eHam Forums / Mobile Ham / antenna conversion
|
on: July 23, 2008, 01:48:42 PM
|
|
Well I was wondering if anyone had tried it and which side of the open coil whip to trim,if not both sides.I have plenty of extra antennas to play with.
Does the 440 portion radiate from the top?
I posted in a couple of forums in case SOMEONE ONLY READ ONE OF THE TWO FORUMS.
|
|
|
|
|
13
|
eHam Forums / Mobile Ham / antenna conversion
|
on: July 23, 2008, 11:52:27 AM
|
|
Has anyone any exerience converting a 1/2 wave-2 5/8 wave (larson 2/70,diamond 73,etc) open coil antenna to operate on GMRS(462.550-467.550)?
I have plenty of ham antennas to play with.
Thanks
Mike
KC9BUH
WQFR960
|
|
|
|
|
14
|
eHam Forums / Elmers / antenna conversion
|
on: July 23, 2008, 11:51:29 AM
|
|
Has anyone any exerience converting a 1/2 wave-2 5/8 wave (larson 2/70,diamond 73,etc) open coil antenna to operate on GMRS (462.550-467.550)?
I have plenty of ham antennas to play with.
Thanks
Mike
KC9BUH
WQFR960
|
|
|
|
|
Loading...
|
