Received S21XV QSL card today.  VERY fast.  Thanks Vadym.  Nice youTube video.


73, Mike
K2CBI

Card (booklet) arrived in the mail yesterday.  Very nice.

 


Mike, K2CBI

Just a suggestion - it's hard to read this page on a black background.  Maybe make the background a lighter color?

Thanks.

Mike,
K2CBI

Tower and antenna can't exceed 42.72 feet.  So if the tower is 34 feet high, antenna can't be more than 8.72 feet.

73, Mike
K2CBI

Brother QL-500 or 550.  Older model, not very expensive (about $50 or less), and produces excellent custom labels.

73, Mike
K2CBI

Card came in the mail today!
 


Mike
K2CBI

GOLIST sent out an email today about this.  7O6T cards are still being printed and will be sent out in November or December.

Mike, K2CBI

I replaced the baluns in my Carolina Windom 80 after I bought a legal limit solid state amplifier - just in case they fried while I was transmitting.  The amp would not appreciate that.  Bob at Balun Designs was very helpful when I chose replacement baluns.  (http://www.balundesigns.com/servlet/StoreFront).

The connectors on the 22 foot section fried on two separate occasions while transmiting (fortunately before the solid state amp).  I replaced the 22 foot coax (RG8) with larger diameter coax (RG8U type) and replaced the UHF connectors and have not had any further problems.

This antenna works well at 45 feet at my QTH.  I run about 1KW.


Mike - K2CBI

I recently acquired a 6 BA and Mark was very kind and prompt in sending the PDf's.
Sorry I misspelled your name Iwan.

73,
Mike K2CBI

Hi Dan,

I never could get D4 to work under Vista.  Ended up using this instead:
http://nixie-clock-v-2-1.software.informer.com/

Freeware.


73, Mike
K2CBI

Ivan - Force-12 will send you these if you send them an email request:

Force12.sales@texasantennas.com


73, Mike
K2CBI

Thank you WW#QB.

Mike

Where did you find the OQRS?  Doesn't seem to be on Clublog this afternoon.

Mike
K2CBI

Thank you Phil.  I haven't yet tried to overwrite the memory, so I guess that this doesn't add much for me.

73,  Mike
K2CBI

Has anyone installed the most recent version of the firmware - v1123?
The web site says that this adds:

- New: Added setup menu item "MEMORY OVERWRITE"

What exactly does this do?

TU and 73, Mike
K2CBI