|
|
|
16
|
eHam Forums / Company Reviews / RE: LIDO MOUNTS
|
on: April 08, 2013, 05:22:03 PM
|
|
hi,
glad you got the order, perhaps the CA DOJ put some heat on Lido to get their act together.
Better to use arkon.com and avoid the disappointments with LIDO.
73 james
|
|
|
|
|
22
|
eHam Forums / Mods And Repairs / RE: Kenwood TS-570 D Fan Problem
|
on: March 21, 2013, 05:39:20 PM
|
hi, Please join other TS-570 fans here http://groups.yahoo.com/group/TS-570/ This is from the Kenwood TS-570 group on Yahoo Re: To Test - How hot does the TS-570 run? Fri Jan 25, 2013 8:53 am (PST) . Posted by: "Charles Rippel" wa4hhg Since you checked the fan, if you also want to see if the fan control circuit is working..... There is a RED thermistor which controls this. Its mounted approx 3/4" forward of the 12VDC power plug. With the radio on, take a hair drier and heat up that thermistor. If the control circuit is working, the fan should trigger on. - wa4hhg 73 james
|
|
|
|
|
23
|
eHam Forums / Elmers / RE: soldering iron recommendations
|
on: March 21, 2013, 05:29:03 PM
|
|
hi
often you can find used Weller 100-120W irons on ebay, they use them for constructing stain glass windows and other fixtures.
A Weller SP-120 is the difference between a heat source and a heat sink.
I also use a drop or two of liquid flux and that helps a lot.
73 james
|
|
|
|
|
24
|
eHam Forums / Computers And Software / RE: Multiple Monitors
|
on: March 21, 2013, 05:24:48 PM
|
|
hi,
reminds me of an old ad in PC Mag, the guy in the ad was in front of a pc with a dozen crt's vertically stacked.
if enabled in Pointer Options, you can tap the CTRL key to help you locate the mouse pointer.
73 james
|
|
|
|
|
25
|
eHam Forums / Company Reviews / RE: AES Amateur Electronic Supply
|
on: March 20, 2013, 04:03:29 PM
|
|
hi,
USPS can only increase domestic postal rates to keep up with inflation, by law, UPS and FedEx and any other companies can set their rates as they wish.
I use USPS Priority for 99% of the stuff I trade and when I buy from Mouser.
73 james
|
|
|
|
|
26
|
eHam Forums / Boat Anchors / RE: AF board in Kenwood TS830S
|
on: March 20, 2013, 03:59:57 PM
|
|
Allen is correct about the ground screws on the boards, best practice with these fine hybrid radios is to give a good cleaning of the switches and bandswitch, using Deoxit or your favorite contact cleaner, just the smallest amount, don't let it wick into the pc board or the wafers on the bandswitch.
You may want to check the solder joints for the pins on the pc board that mate to the cable connectors, many owners have found cracked solder joints and once repaired you are back on the air.
73 james
|
|
|
|
|
Loading...
|