hi,

take a look at this topic, the tip from WB2WIK, Steve,

introduce a source of negative DC voltage into the ALC input pin
on the accessory connector (rear panel).

many of us do this with our kenwood hybrids.

http://www.eham.net/ehamforum/smf/index.php?topic=40670.0

73 james

hi Carl,

Take a look at this page

http://www.qsl.net/wm2u/interface.html

73 james

Yes, that twilight zone episode was good, Sebastian Cabot was Pip aka Satan.

"A Nice Place to Visit" is an episode of the American television anthology series The Twilight Zone
first aired on CBS on April 15, 1960.

The title comes from the saying,

 "A nice place to visit, but I wouldn't want to live there."

73 james

hi,

Since they had no access to the computers on the Enterprise,
there was no way to slowdown the playback of the tricorder data for analysis.

Spock built an interface using vacuum tubes and parts common to the era.

"I am endeavoring, ma'am, to construct a mnemonic memory circuit using stone knives and bearskins."

Kirk and Spock could determine the approx. time that McCoy ran into the Guardian while it was playing history, locate him to prevent damage to the timeline and return to their timeline.

http://en.memory-alpha.org/wiki/The_City_on_the_Edge_of_Forever_%28episode%29

"Time has resumed its shape. All is as it was before."  - Guardian of Forever

73 james

hi,

FX has a spy show this season, The Americans.

Will be good to see some old radio equipment in use.

http://vod.fxnetworks.com/watch/theamericans

73 james

hi, 

I got it at MCM, often they have free shipping.
If you order the non aerosols you have no hazmat fees for ups.

DeoxIT Pump Spray MCM Part #: 200-195

http://electronics.mcmelectronics.com/search?cataf=&view=list&w=deoxit&x=0&y=0

73 james

hi Tom,

have you tried autoruns from sysinternals, no cost, microsoft owns them now.
you can stop the item from running on startup.

http://technet.microsoft.com/en-us/sysinternals/bb963902

then you should be able to delete it, if not, then use the file assassin
from malwarebytes, no cost.

http://www.malwarebytes.org/products/fileassassin/

73 james

hi Glenn,

not sure if you are a member of the yahoo group..

http://groups.yahoo.com/group/TS-520_820_530_830/

All are welcome.

73 james

hi,

IBM also sells off lease laptops, desktops and monitors.

free shipping and Thinkpad quality at great price.

3 or 4Gb memory and warranty included plus WIN 7 O/S

http://www-304.ibm.com/shop/americas/content/home/store_IBMPublicUSA/en_US/laptops.html

73 james

hi,

No special tools required, just slip joint pliers and screwdriver.
the two screws secure the strain relief not the connector,
that snaps shut with locking plate.

These connectors are use in modular home construction and are insulating devices equivalent to NM cable and can be installed in accordance with Section 334.40(B), so if is being used for rewiring in existing building, it can be concealed and finished.

http://www.ampnetconnect.com/product_groups.asp?grp_id=2307&path=0,2299

I am not a licensed electrician and local codes may or may not allow them.

73 james

hi,

Malwarebytes has a no cost version,
you run it when you want to, it is  not automatic.
works very well.

http://www.malwarebytes.org/


73 james

One company I worked for would get ads with links to
their competitors, courtesy of Google, on their site.

It did not take long before we convinced them that
IBM did not have links to Oracle, SAP or Dell on their sites!

73 james

hi

these connectors from Tyco are available but not popular

http://www.te.com/catalog/cinf/en/c/11621/1394

73 james

hi,

I have the same model mount with the pins,
you may have drilled the holes properly but
got the plate rotated 180 out of line.

http://bellsouthpwp.net/b/r/breedlove1/page17.html

"If you are installing a pinned set, the mount fits the plates only one way
even though the difference is small.  So insure that the plate is turned
the right way for the Ball mount and that it will come out in the vertical position."

73 james

Hi Kevin,

try these guys, I've used them before, great service.

http://www.ww-manufacturing.com/

click on two way and you can search for the two packs,
nicd or nimh.

if you want to rebuild them yourself, take a
look at mouser.com for replacement cells.

here is a great yahoo group for midland LMR

http://groups.yahoo.com/group/MidlandLMR/

Good info  here

http://www.repeater-builder.com/midland/midland-index.html

73 james