Hi Wayne
I have sent E-mail to ARRL about the glitch.
Paddy

Hi Jon, yes its a good facility and I'm using it for all qsos.
 Return rate for direct cards is so poor now.

Hi
Have alook at this site about magnetic loop construction.
www.magnetic-loops.info/

Hi Folks
While doing a serch in LOTW I discoverd some of my entries were missing.
On closer inspection of the search window I found if I left a space ( just one letter ) on the left side of the window it would return a nil report.
I usually copy and paste the callsign into search window. This has resulted in a few duplicates entered into LOTW.
So keep your callsign entry close to left side of search window.
Paddy

Hi
I have found the problem. It was the finishing time  in the cq rtty contest editing. I had put the finishing as the 25th,when I changed it to the 26th all the qso's were now numbered. Phew,I thought I was in deep manure.
regards
Paddy EI1DG
 

Hi Guys
I have a problem with logging with MixW (Ver 2.20) When in contest mode for the recent CQ RTTY,
I had qso's numbering 1,2,3, etc. Well I went to have dinner
and closed down the station. Opened up and started MixW again.
 This time there was no logging sequential numbering!!! It stopped working at qso #498 and when i
added more qso's it just showed a zero.The bottom line in the log bar showed the correct number being entered.
When I go to display the whole log all the contacts are there. Can sombody tell whats wrong please. I dont
want to lose them in the cabrillo formating to send the log off.
Best regards
Paddy EI1DG

Thanks for all your replies. I will use your mod Phill,very good idea. This is the first time i took it down after about 14 months up and noticed that it had come away at the base of the screw which holds it in place. i will try the 100pf and see what happens.
Best regards.
Paddy EI1DG

Hi
I have discoverd the hf9v 67pf capacitor is broken(30m tuning), as I have a 100pf in my box could I use this 100pf instead or would it detune the antenna badly?.
best regards ....Paddy EI1DG