Hi Jeff,

Can I ask what specifically caused you to want to install a low-pass filter?  With today's cleaner rigs and no more TV Channel 2, many hams found the LP filters unnecessary and have opted to go without them.  I took mine out of several antenna runs years ago.  Just a thought.  Others will chime in, I'm sure.

73,

Terry, WØFM

OK, I suspected something like that.  And, I saw on the news last night that Wikipedia and others were taking a stand.  Thanks for the quick info.

Terry, WØFM

Just noticed that the eHam logo at the top left of the page has been covered with a black bar.  What's up with that?

Terry, WØFM

Great job, Jeff.  This post with its quality photos and your descriptions of the events should be a model for those of us who intend to present something like this on eHam in the future.

Bravo!

Terry, WØFM

Only trouble with that Jeff, is that the reader would have to know about when WWII ended to find that tenth call area info on your link to the AC6V web page.  That would make a good "Jay Walking" bit though!  

Terry, WØFM

Well yesterday I was able to determine that neither Home Depot or Lowes handles these specific Leviton dimmers in the STL area.  So, I'll have to order one from the likes of Leviton or Amazon in order to do an evaluation.  I will be back!

Terry, WØFM

Good point, Mark.  The product just might be too new for direct user reports at this point.  I might invest in one and disect it to see if I can identify the "Radio/TV filter".

Back on the RFI/EMI forum, Tisha, AA4HA, and others were discussing the new Leviton "filtered" AC wall outlets among other new products.  I haven't had a chance to read all their responses, but I will.

73,

Terry

Thanks Don, I know that.  Been a ham for 50 years.  My question was specifically about the new "digital touch" dimmers from Leviton.  I've never replaced a dimmer in my house for ANY reason since 1997.  I am just looking for an edge on the NEW "digital" dimmers from Leviton.

Terry, W0FM

VERY impressive collection, Dale.  Your dial and meter faces are extremely sharp and clean.  Do you make new ones for yourself or have you found a vendor who does such a nice job?  I found a local who made a few dial faces and he made one for my Philco cathederal restoration.  That was years ago and I know the technology to replace meter and dial faces must have changed dramatically.

Great work my friend.  I am envious to say the least.

73 de Terry, WØFM

I posted this on the RFI/EMI Forum some time back and only got one response.  I know this Elmers forum gets more traffic, so, please pardon the OT repost.  (And, yes, it's 2012 and I've stocked up on a bunch of incandescent bulbs for the cans these dimmers will control). 


I need to replace some old wall toggle switches in my kitchen and want to add a dimmer to a couple of the circuits involved.  The new Leviton toggle switch looks just like a standard toggle wall switch but has two very small "touch pads" just to the right of the toggle lever.  This looks similar to the former toggle dimmers that had a small lever in that location for dimmer preset.  Leviton calls this a "digital dimmer" (digital as in "finger" I suspect).  The specs claim a built-in Radio/TV interference filter.  Fortunately, I have had no ham radio RFI issues with any dimmer in my house (around a dozen or so) for 15 years and would like to continue that.  Has anyone had any experience with this new toggle dimmer?


http://store.leviton.com/ToggleTouch-Preset-Digital-Incandescent-TGI06-1LW/dp/B004FROFJ6

Thanks and 73,

Terry, WØFM

This won't fit in an Altoids tin, but it is small, light, self-(crank)powered and provides a few other options.

http://www.amazon.com/FR160B-Microlink-Self-Powered-Weather-Flashlight/dp/B001QTXKB0

73,

Terry, WØFM

Maybe so, but we hams love that stuff....."the rig here's a Hair-puller 101".   

73,

Terry, WØFM

WX7G:
Thanks for your note, Dave.  I did mention in the very last line of my post that I had prepared for the new changes by stocking up on incandescents for the kitchen.  I would not invest in standard dimmers without knowing that I had the bulbs in-house.

There are a number of sites on-line where you can order large quantities of incandescent bulbs for really low prices.  I have a large and varied supply.  Some of those sites report that they will have stock of those to satisfy customers demands for several years.  (Of course, the prices just might go up!  )

But, I'm all set.
73,

Terry, WØFM

I have re-posted this in the Elmers forum in hopes of attracting more replies.  Thanks for looking.

73,

Terry, WØFM

I googled "Comet GP-9 Installation" and this was the second hit:

http://www.cometantenna.com/pdfs/GP-9.pdf

I agree that you are asking for problems installing the GP-9 on the same mast as the Titan vertical.  75-100 feet of coax should not be an issue for you.  Use good quality coax, particularly with the VHF/UHF antenna.

73,

Terry, WØFM