Tnx guys for all the help.  Will let you know in next few days whether smoke; no smoke/no signal; or whatever. Need first to get into it and clear out any critters that might have made residence over the years.  73,  Steve

Hi, wondering what procedure is best.  I have a variac and can bring up the filaments and then the HV slowly but wondering what is best procedure as to time to allow and  increment steps  to rebake or reoxidize these tubes, plus any other procedure I should use with respect to any other aspect of this rig, like first oiling fan bearings, etc e tc.     Thanks very much, Steve   K1PEK

Craig,  tnx so much for the help on this,  much appreciated !!   73, Steve  K1PEK

Hi, I have an old IC-28H and no manual. While waiting for manual to come, can anybody tell me how to program a PL tone freqcy?   Tnx very much, Steve  K1PEK

Tnx to both responders.  I haven't tried either source but will.  If any other readers have sources, would be much appreciated.   73,  Steve

Hi, if you know any reliable/trustworthy sources for a 4-1000A, I would much appreciate the web site address (more than one source if you have).

Tnx, 73, Steve  K1PEK