Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net



QSL Managers
     

Ham Links
     


  Home Help Search  
  Show Posts
Pages: [1] 2 Next
1  eHam Forums / Mobile Ham / RE: YAESU FT-1900R? on: April 23, 2010, 08:36:28 AM
Alan,
     Thanks for your input. I really appreciate your taking the time to reply. This one happened to be in use in my shack but will be installed for mobile use. Any radios I operate, whether base or mobile, are mounted with the entire heat sink exposed, enabling maximum ventilation.
     Next question: Why did Yaesu not address this in the manual and clarify that this is "normal" for this particular model, thereby alleviating much concern which the operator may have? Oh, well.............. Shocked
     
     
2  eHam Forums / Mobile Ham / YAESU FT-1900R? on: April 19, 2010, 05:40:58 PM
Recently I purchased a YAESU FT-2900R. I am experiencing significant "Over-Heating" problems. For instance, in a 35 min. QSO with 10W TX the radio "timed-out" at 151.4 degrees!!! I am now looking to possibly purchasing an FT-1900R. Looking closely at the menus I see that this model has a "TEMP", also. Just wondering if anyone owns one of the FT-1900R's and are experiencing such a high temperature on any sustained QSO's? Thanks,
Jerry     KF4UJA
3  eHam Forums / Misc / COMET or DIAMOND on: March 23, 2010, 05:49:59 PM
I am seriously considering a Tri-Band antenna (2/220/440) for my base station. I have narrowed my choices to the COMET CX333 or the DIAMOND X3200A. So, if any of you have had "hands-on" experience with either of these antennas, I would welcome your input, suggestions, experience, opinions, etc. Also, any suggestions for any other antennas other than these two are welcomed and appreciated. Thank you in advance!
Jerry KF4UJA
4  eHam Forums / Elmers / COMET or DIAMOND on: March 23, 2010, 05:42:52 PM
I am seriously considering a Tri-Band antenna (2/220/440) for my base station. I have narrowed my choices to the COMET CX333 or the DIAMOND X3200A. So, if any of you have had "hands-on" experience with either of these antennas, I would welcome your input, suggestions, experience, opinions, etc. Also, any suggestions for any other antennas other than these two are welcomed and appreciated. Thank you in advance!
Jerry KF4UJA
5  eHam Forums / VHF / UHF / COMET or DIAMOND on: March 23, 2010, 05:36:05 PM
I am seriously considering a Tri-Band antenna (2/220/440) for my base station. I have narrowed my choices to the COMET CX333 or the DIAMOND X3200A. So, if any of you have had "hands-on" experience with either of these antennas, I would welcome your input, suggestions, experience, opinions, etc. Also, any suggestions for any other antennas other than these two are welcomed and appreciated. Thank you in advance!
Jerry    KF4UJA
6  eHam Forums / Misc / Mobile Mounts on: January 15, 2010, 09:15:13 PM
Has anyone here had any dealings with "MOUNT GUYS"? I am considering the purchase of a couple of their mobile mounts. Thanks,
Jerry    KF4UJA
7  eHam Forums / Company Reviews / MOUNT GUYS on: January 15, 2010, 09:03:02 PM
Has anyone here had any dealings with this company? I am considering the purchase of a couple of their mobile mounts. Thanks,
Jerry    KF4UJA
8  eHam Forums / Company Reviews / McKay Products on: January 15, 2010, 08:59:49 PM
Has anyone here had any dealings with this company? I am considering the purchase of a couple of their Speaker Mics! Thanks,
Jerry    KF4UJA
9  eHam Forums / Misc / McKay Speaker Mics on: January 15, 2010, 08:54:00 PM
Has anyone here had any dealings with "McKay Products", specifically their "Spkr. Mics"? Thanks,
Jerry   KF4UJA
10  eHam Forums / Misc / RUBBER "BUMPERS/FEET" on: August 18, 2008, 08:23:22 AM
Gentlemen, "Thanks a million" for coming thru, again! As usual, there a many who will provide reliable info as requested! I have found what I needed..........73
Jerry     KF4UJA
11  eHam Forums / Misc / RUBBER "BUMPERS/FEET" on: August 12, 2008, 11:58:12 AM
I need help in locating a source for this product. I need to glue some of these on the bottom of a number of units I own. As always, I have found that there are many of you Hams out there who are more than willing to lend a helping hand!!!! 73
Thanks,
Jerry KF4UJA
12  eHam Forums / Misc / G5RVM--10-160(204') on: February 23, 2008, 06:29:27 PM
I just cannot locate the instructions for this wire antenna that I recently purchased. Could someone please send me a copy or direct me to a link/site to download it? Thanks,....73
Jerry
13  eHam Forums / Elmers / HT Mono-band Telescoping Antennas on: October 31, 2007, 08:37:32 AM
I'm considering purchasing a 2mtr.& a 220Mhz (sma & bnc). From CheapHam.com. Models: Super Stick II & Super Stick III. Now, I'm concerned about the "stress" factor that these type of antennas would have on both type of connections. I always value the input/experience that any of you might have about this issue of concern to me. Any suggestions/opinions for other options to consider? Thanks,   73
Jerry   KF4UJA
14  eHam Forums / Amplifiers / 3-500Z TUBE-Which Brand Most Reliable on: October 26, 2007, 06:44:22 AM
I sincerely appreciate all of your input on this subject. As always, there are so many of you out there who share your knowledge, experience, and expertise so very graciously!!! Again, thank you,          73
Jerry
KF4UJA
15  eHam Forums / Misc / "SMOKING" vs "NON-SMOKING" Env on: October 21, 2007, 07:40:28 PM
OK, OK gentlemen/ladies and my fellow "HAMS"!! I agree with both the pros and the cons!!!!! I truly appreciate all of you who have taken your time and effort to reply to this issue. It's an issue with some and not an issue with others!!!! Again, I thank all of you so very much for your INPUT!!!
Jerry
KF4UJA            
Pages: [1] 2 Next
Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!