|
|
|
17
|
eHam Forums / Elmers / There has GOT to be a better way???!!!!!
|
on: November 06, 2006, 05:05:16 PM
|
|
You might find it easier unscrewing the board on top that connects to the tops of the tubes, once this is off all the tubes can be unscrewed out of the connectors gently without breaking them, I hope this helps....Clint VK2ACM
|
|
|
|
|
22
|
eHam Forums / Elmers / Roadrunner Wireless Internet
|
on: April 29, 2006, 07:21:47 PM
|
|
The forward frequency downstream is 567Mhz normally a 256 QAM emission, the upstream is 32.75Mhz at 16 QAM I use a wireless router a few feet away from the transiever with no problems on all bands running 100 watts.
I hope this information helps you out....73 Clint
|
|
|
|
|
30
|
eHam Forums / Mods And Repairs / ft 8500 stuck in x band
|
on: January 11, 2006, 05:47:18 PM
|
|
This is what it states in the users manual reference the x band repeat :
Before enabling cross band repeat, configure both channel settings as desired. Then, hold RPT 6 while turning on the power. The display shows X-BAND RPTR ON/OFF.
I hope this helps you out...73 Clint VK2ACM
|
|
|
|
|
Loading...
|
Show Posts
