Bill you might want to try this site out,it will find all the australian hams that are licensed,let me know how it work's out for you....73 de clint vk2acm

http://www.aca.gov.au/pls/radcom/register_search.search_dispatcher

Try this site it might be what your looking for look under the icom section,under software...73 de clint vk2acm

http://www.cqham.ru/sch_eng.html

Hi Brian,
You might want to try this site it might be what your looking for...73 de clint vk2acm

http://mods.dk/view.php?ArticleId=3032

You might want to check out this site and look under the manuals section,i think the md100 mic is listed...73 de clint vk2acm

http://mods.dk/

you might find this site useful for what your looking for...73 de clint vk2acm

http://mods.dk/view.php?ModelId=696

Hi Gary,
check out this site it might be useful to you,look under the kenwood title and it has some item there that you may need for the ts50,let me know...73 de clint vk2acm

http://mods.dk/view.php?ModelId=513

HI PETER YOU MIGHT WANT TO LOOK AT MY SITE ON THE HOMEBREW EQ/AMP WHICH WOULD PROBABLY FIT INSIDE THE MIC....73 CLINT

http://mypeoplepc.com/members/vk2acm/VK2ACMAUDIOSITE/

GOOD LUCK...

hi ronnie,
to answer your question,yes they use commercial power to run their non standby and standby power supplies.
Which is converted to 24vdc inside the line extenders and main line trunk and distribution amps.I hope this helps you out,as they will be going to VOIP soon so they will have to upgrade much of the old 20 yr old cable...73 de clint vk2acm

NOT SURE ABOUT THE IC2700H YOU MAY WANT TO TRY THIS SITE.

http://mods.dk/

not sure if this site can help you,it will show you the schematic diagram for the hm103 mic,you should be able to figure it out from there,it is in a pdf format...73 clint

http://www.rigpix.com/icom/ic706mkiig_manual.pdf

Hi Sidney,
I Use Procw So I Can Send CW With My Computer DB9 Serial Port,Using A Homebrew Interface It Works Great,Let Me Know If You Would Like A Copy...73  clint

hi kev not sure if you know about this site it might help you out mate,let me know....73 de clint vk2acm


http://www.icongrp.com/~sllewd/vx5rmain.htm#software

I FOUND THIS SITE IT MIGHT HELP YOU OUT...73 DE CLINT VK2ACM

http://www.eham.net/articles/2148?ehamsid=2b37bd2cf75613af87b6dc8340758a5b

not sure what your looking for in the manual,but,there are some topics under the ft8100 series radio under the yaesu heading,i hope this helps you....73 clint vk2acm

http://www.mods.dk/

Lebrew,
it states in the users manual as follows :
Just press and hold D 9 * together while turning the transiever on.

i hope this helps you out....73 de clint vk2acm