 Show Posts
|
|
Pages: [1]
|
|
1
|
eHam Forums / Elmers / no output on 2mtrs & 432 on my TS200
|
on: October 24, 2007, 02:45:41 PM
|
|
My TS 2000 works great on all bands EXCEPT 2 and 432..no RF at all on 2&432..receive is good on these 2 bands no output ssb,fm, am ...could menu settings effect these 2 bands...need help RAY W4TZG
|
|
|
|
|
3
|
eHam Forums / Elmers / Ft 757GX
|
on: July 18, 2007, 06:24:36 AM
|
|
Ft757gx bought from silent key estate, transmits ok, but no receive audio any band or mode can hear little noise on band...this radio was out of service for 8 years..give me hint as why no receive audio...thanks
|
|
|
|
|
4
|
eHam Forums / Elmers / Ft 757GX
|
on: July 18, 2007, 06:23:38 AM
|
|
Ft757gx bought from silent key estate, transmits ok, but no receive audio any band or mode can hear little noise on band...this radio was out of service for 8 years..give me hint as why no receive audio...thanks
|
|
|
|
|
7
|
eHam Forums / Computers And Software /
|
on: March 07, 2003, 07:55:06 PM
|
|
my compaq computer 7478 model..it hada virus that wiped it clean, after getting the virus out I can connect to internet but can't download anything from web sites..what have I missed checking ? W4TZG
|
|
|
|
|
8
|
eHam Forums / Elmers / service on TNCs
|
on: November 13, 2002, 09:45:36 AM
|
|
I was told by e-mail from Kantronics ..Ken in technical servicethat they do not service Kam + models any longer..I'v had this one about a year, thats sure lousy service, not to service what they sell..
|
|
|
|
|
9
|
eHam Forums / Elmers / service on TNCs
|
on: November 12, 2002, 02:47:25 PM
|
|
looking for someone that do'es service work on Kantronics Kam +, kantronics do'es not service what they sell..I will know better next tnc I buy..thanks W4TZG
|
|
|
|
|
10
|
eHam Forums / Elmers / info on service for kantronics tnc
|
on: November 12, 2002, 02:33:27 PM
|
|
I am in need of someone that do'es service work on KAM + tnc, Kantronics sells equiptment but won;t service it..I'll know next time who to buy from..ThanksRay W4TZG
|
|
|
|
|
11
|
eHam Forums / Elmers / TNC KAM +
|
on: October 25, 2002, 09:02:44 PM
|
|
I am still having problem getting tnc to Xmit, I have used every way possible on wireing the mike plug, when I plug it in radio is keyed, I have tried this on 3 different radios same result, I checked the DB9 plug it shows all 9 pins shorted to ground..has anyone had a problem like this..thanks W4tzg
|
|
|
|
|
12
|
eHam Forums / Elmers / AEA PK232MBX
|
on: October 25, 2002, 08:56:08 PM
|
|
My pk232mbx has stopped giving me time stamps, daystamp or any info on stamps, is there a battery for this purpose, pk232 is about 8 years old..thanks..W4TZG
|
|
|
|
|
13
|
eHam Forums / Elmers / packet
|
on: October 17, 2002, 10:59:12 AM
|
|
Thanks Bob for info..question do you remove K3 completly..the article on page 63 says not to connect to PTT on mike plug, is that right..thanks again..w4tzg
|
|
|
|
|
14
|
eHam Forums / Elmers / packet
|
on: October 16, 2002, 07:28:46 PM
|
|
I have new Kantronics KamPlus, my problem, I followed the manuals instruction on wiring to radio VHF, I plug the cable from Kan to radio and it keys radio, I have tried same thing with 3 different radios same thing, kenwood radio TMV7A,TM733a, And azden6000..has anyone run into this kind of problem, after all the checks I've made I now suspect the Kam has internal ground causing problem, can anyone help...W4TZG
|
|
|
|
|
