Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

donate to eham
   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: Icom RSBA1 and Icom 7300  (Read 6617 times)
W9PMZ
Member

Posts: 627


WWW

Ignore
« on: September 13, 2017, 12:05:20 PM »

Hello,
I now have an Icom 7300.  I have used the Icom RSBA1 software ok with the Icom 9100 in the past.
I did update the software from Icom to v1.94.
Using the menu on the Icom 7300 the only entry is auto 0r 19200 baud.
If I set the baud rate to auto on the Icom 7300 I cannot communicate with the attached PC.
If I set the baud rate to 19200 baud then it does communicate.
If I set to auto on the Icom and 115xxx on the PC I cannot communicate.  Does anyone have an idea what is wrong?
I can connect via a remote PC and do get audio, but I am unable to get the remote control program to work.  Again any idea what is wrong?
73,
Carl - W9PMZ
Logged
W9PMZ
Member

Posts: 627


WWW

Ignore
« Reply #1 on: September 14, 2017, 03:27:04 PM »

Ok I have it working. But is seems that the IC-7300 is only capable of 19.2kb.
73,
Carl - W9PMZ
Logged
N8JAF
Member

Posts: 10




Ignore
« Reply #2 on: November 01, 2017, 10:55:11 AM »

This post is a bit old but the 7300 will run at 115000. You need to go into the settings and go to connectors->CIV and set it to unlink from remote. This separates the USB connections from the CIV connection on the back. Once you do that you can set the speed to 115000
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!