Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: Connection from 950s to henry 2k  (Read 449 times)
WB8JBG
Member

Posts: 34




Ignore
« on: August 31, 2008, 12:40:37 PM »

I bought a Kenwood 950S and a Henry 2K classic, anyone know how to connect the 2?
Logged
WB2WIK
Member

Posts: 20543




Ignore
« Reply #1 on: August 31, 2008, 02:57:00 PM »

ACC plug on 950S (ground on xmit) to RLY line on Henry; coax patch cable from 950S antenna jack to Henry INput jack; ALC cable from ACC plug on 950S (ALC IN) to Henry ALC output jack.

Do you have the manuals?  The 950S manual is very clear about amplifier connections...

WB2WIK/6
Logged
KD8GEH
Member

Posts: 464




Ignore
« Reply #2 on: September 02, 2008, 09:52:40 PM »

Make sure the Henry isn't 110 volt key voltage, if so you would want to put a buffer relay in there at 13 volts or so. I don't believe the 950 has the high voltage relay.

My 950S is +13.5 @ 10 mA max.  The remote DIN connector pin out is:

6 =ALC  7 =+ 13.5VDC @ 10mA 3 = Standby Switch (PTT Circuit for foot switch) 2=Common  4+ Xmit 5 Recieve

Hope this helps! Enjoy

73, Dave KD8GEH
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!