Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: no output on 2mtrs & 432 on my TS200  (Read 268 times)
W4TZG
Member

Posts: 15




Ignore
« on: October 24, 2007, 02:45:41 PM »

My TS 2000  works great on all bands  EXCEPT 2 and 432..no RF at all on 2&432..receive is good on these 2 bands  no output ssb,fm, am ...could menu settings effect these 2 bands...need help RAY W4TZG
Logged
KC8VWM
Member

Posts: 3121




Ignore
« Reply #1 on: October 24, 2007, 02:55:39 PM »

The first thing I would try is a complete reset of the radio. This will reconfigure all the menu settings (changed by mistake or otherwise) back to thier original factory specifications.

It may or may not resolve the problem. It will however eliminate any possibility that a menu setting as being the primary cause.

73 de Charles - KC8VWM
Logged
K6AER
Member

Posts: 3535




Ignore
« Reply #2 on: October 24, 2007, 02:58:10 PM »

Can you hear any signal on those bands? Is it receiving?

The final output board may be bad and you are only putting out a few milliwatts.

Check the final VHF/UHF output fuse.
The output VHF/UHF relay could be bad.
The VHF/UHF output coax might have come loose or the input coax is loose.
VHF/UHF output or a driver device has failed.

If you can not hear any signal the PLL synthesizer matrix board is out of lock.
Do you have a digital readout on those bands?  If the PLL is bad you will have no display.

The TS-2000 is pretty easy to work on if you have trouble shooting skills and equipment. If not, I suggest you contact Bill at B&B Technical Services
Logged
K6AER
Member

Posts: 3535




Ignore
« Reply #3 on: October 24, 2007, 03:00:05 PM »

Sorry, I missed you're first statement about it receiving. Skip that question.
Logged
N6AJR
Member

Posts: 9927




Ignore
« Reply #4 on: October 24, 2007, 09:48:46 PM »

are you feeding it into a seperate 2 and 440 antenna.  how does it act into a dummy load?? the 2, and 440 have seperate antenna outputs and the 6 m can switch between hf 1 and hf 2
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!