HEIL STD 3 WAY 2 WATT SPEAKER PIN OUT

[N2WS]

I HAVE A SMALL BOOK SHELF SPEAKER. MADE BY HEIL SOUND.
IT MEASURES  3.5 X 4 X 5 INCHES.
THE LABEL READS "THREE WAY, 2 WATT."  THERE ARE TWO JACKS ON THE BACK. ONE IS 12 VOLTS DC, THE OTHER IS A 5 PIN PLUS GROUND DIN PLUG.  I NEED THE PIN OUT FOR THE DIN PLUG.  THE INTERIOR ONLY ATTACHES TO A SMALL CIRCUIT BOARD.  I APPRECIATE ANY INFO ON THIS AS IT IS A FINE SPEAKER.  ALL REQUESTS FROM HEIL SOUND HAVE BEEN UNANSWERED BY E MAIL OR BY PHONE. THANK S FOR ANY INFO IN ADVANCE  MY EMAIL IS
wallyshapiro@comcast.net

[KB9CRY]

ALL REQUESTS FROM HEIL SOUND HAVE BEEN UNANSWERED BY E MAIL OR BY PHONE


I find that hard to believe.  And, stop SHOUTING.

[TANAKASAN]

Take your caps lock key off then send the message again. Then we'll try to help.

Tanakasan

[N2WS]

sorry about the caps.  I heard from Bob yesterday. He is sending me the poop sheet on the SS-2 speaker.  this is a very effective site.  thank you for the replies. he still uses the speaker in his lab.   Thanks again.
Wally

[TANAKASAN]

Next time anyone gets stuck with a problem like this there's a nice easy trick to use. Connect a 1.5v cell and a 1uF capacitor in series. Connect one end (either way round) to the chassis then probe input pins one by one until you hear a click from the speaker. That's the input.

Tanakasan