Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: Niches to Fill  (Read 296 times)
WX7G
Member

Posts: 5920




Ignore
« on: October 24, 2009, 01:23:48 PM »

The ham radio manufacturers are leaving some niches unfilled. DX Engineering, MFJ, and others might consider these products:

160 meter vertical:
A plug-and-play top band antenna. A base loading kit for the popular 43' vertical is a start. A top loading kit is another; a higher performance way to get on top band that retains all band coverage.

Ladder Line Balun:
It it isn't often that placing the balun at the transmitter and not at the antenna is recommended for a coaxially fed dipole. So why is this the advice given for a ladder line fed dipole? Given ideal symmetry a feedline choke at the antenna would not benefit a ladder line fed dipole, but given a non-symmetrical installation or an off-center fed design a ladder line feedline choke might be beneficial.

A 1:1 choke advertised for use between the unbalanced output of a tuner and a ladder line might be a good seller. "Avoid the under-designed 1:4 voltage balun inside your tuner by using the X brand 1:1 tuner balun." I know such devices are made but they are not advertised as such.

A one-stop RFI store:
Ferrites at one store, an AC line filter at another, it's hit and miss. The AC line filters sold are mysterious black boxes. What is the attenuation? Common-mode, Differential-mode, the test set-up? The usual but often useless 50 ohm in and 50 ohm out test set-up? What about UL listing? Damping resistors? Unheard of. I design custom EMI filters and from what I see I would not use a ham EMI filter.

I would like to see the snap-on ferrites with useful impedance vs frequency data. A good tutorial at the supplier would be great.

How about 'trial' RFI kits? Perhaps a rental? Purchase or rent an RFI kit that includes a very large number of snap-on ferrites, AC, and DC filters. Send back what you don't use and receive credit toward another purchase.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!