|
G6KIZ
|
 |
« on: January 17, 2003, 05:45:35 AM » |
|
Sorry - I've cross posted this in home-brew too as I'm not sure which is correct section....
I've searched in vain for any details on this to no avail. Has anybody made their own cable for this - I've tried a simple straight through wire cable and can't get it to work - presumably something extra is needed.
I assumed the outer (of earpiece plug) would be ground and tried the middle and tip both ways on the 2 and 3 pins for the 9 pin D.
Would running from mains adaptor (6v or so - they say up to 16 is ok so I'm betting it gets dropped anyway) rather that NiMH at 3.6v make any difference ?
Only cables I've seen are mail order and cost > £35 which seems to be a rip-off to me - that's 25% of radio !!!
|
|
|
|
|
Logged
|
|
|
|
OHWHODAT
Member
Posts: 2
|
|
« Reply #1 on: February 14, 2003, 04:26:15 PM » |
|
No,
We are really trying to get the software (freeware from Alinco) to hook up to the radio. The manual says nothing, I agree, however, the Alinco web site does say that their freeware makes this radio easier to program and it is done through the sterio earphone jack. The other end of the cable is a 9-pin, but that is as far as I can get.
Stephan
|
|
|
|
|
Logged
|
|
|
|
RJSCOTTY
Member
Posts: 1
|
|
« Reply #2 on: February 09, 2003, 10:02:01 AM » |
|
To right I have tride to build my own cable after finding the manufactures on to be a rip off.
I have ran into the same problem.
|
|
|
|
|
Logged
|
|
|
|
KL7IPV
Member
Posts: 984
|
|
« Reply #3 on: February 11, 2003, 12:49:01 AM » |
|
I just read though the manual for that radio and find nothing about connecting to a PC. The info for cloning is there. Is that what you are trying ot do? If so, can you not go from the PC sound card output to the earphone plug on the radio to input the frequencies you want to use?. It doesn't look like a compatible DB9 circuit is called for to do that. I could be wrong, I am just making a suggestion based on what I saw in the manual.
73
Frank
KL7IPV
|
|
|
|
|
Logged
|
|
|
|
PATCHIT
Member
Posts: 1
|
|
« Reply #4 on: March 07, 2003, 07:47:44 PM » |
|
i have tried a few things with this model all i can get is the unit to display O.K.
|
|
|
|
|
Logged
|
|
|
|
IM-THE-CLEAVER-ONE
Member
Posts: 3
|
|
« Reply #5 on: March 15, 2003, 05:27:42 AM » |
|
i know how to do it
made one
it works
using it
email me and i will send u schematic diagram anyone with basic electronic knoledge can build one on a scale of 1 to 10 this build rates .79 its that easy
|
|
|
|
|
Logged
|
|
|
|
|
|
G8NTI
Member
Posts: 1
|
|
« Reply #7 on: April 20, 2003, 10:02:35 AM » |
|
Please can you forward me the information on how to make the Cable for ALINCO DJ-X3 Thanks.
|
|
|
|
|
Logged
|
|
|
|
9A6DQB
Member
Posts: 1
|
|
« Reply #8 on: May 07, 2003, 04:56:30 AM » |
|
Please send me diagram how to conect DJ-X3 to PC. Thanks! mail is abu_1212@yahoo.com73 de 9A6DQB |
|
|
|
|
Logged
|
|
|
|
BLOCK
Member
Posts: 1
|
|
« Reply #9 on: May 30, 2003, 06:09:38 PM » |
|
If anyone could send me the diagram that would be nice. My e-mail address tvblock@planet.nl |
|
|
|
|
Logged
|
|
|
|
TVR
Member
Posts: 2
|
|
« Reply #10 on: June 02, 2003, 07:00:30 AM » |
|
Please send me diagram how to conect DJ-X3 to PC.
Thanks!
|
|
|
|
|
Logged
|
|
|
|
TVR
Member
Posts: 2
|
|
« Reply #11 on: June 02, 2003, 07:04:16 AM » |
|
Please send me diagram how to conect DJ-X3 to PC. Thanks! My e-mail is: tvr@seznam.cz |
|
|
|
|
Logged
|
|
|
|
MM0DVB
Member
Posts: 2
|
|
« Reply #12 on: June 08, 2003, 01:53:01 PM » |
|
Hi could someone please send me the instructions on how to make up an interface cable for my Alinco DJ-X3.
Thanks in advance
MM0DVB
|
|
|
|
|
Logged
|
|
|
|
MM0DVB
Member
Posts: 2
|
|
« Reply #13 on: June 08, 2003, 01:55:01 PM » |
|
Oops forgot my email address. mm0dvb@lineone.net |
|
|
|
|
Logged
|
|
|
|
|
