Logwindows with a FT-920

[KE4HBE]

I cannot get logwindows to control my new FT-920, I was using a FT-840 with logwindows before with out any problems. The manual for logwindows talks about changing the polling rate but I cannot make the menu  active to do so
Thanks for your help
Paul- ke4hbe

[CT2ILQ]

What version are you using?

I had tried once Logwindows and the more recent versions did not support the FT920 !!!
Yes you can choose Ft920 on the menus but it doesnt work !!!!

It was on a friends computer/radio and I hit
the head on the wall many times before discovering
that.
I thought it was serial port compatibility troubles,
or the FT920 serial port "fried", but it was nothing of that.

Test the computer/rig interface with:

Colins Spectrum analyser:
http://www.mm5agm.pwp.blueyonder.co.uk/

FT920 Cat Program:
http://home.earthlink.net/~n7yg/ft920cat.htm

Or test it with CI-V-Commander that is part of the
DX-Lab suite of programs.

http://www.qsl.net/dxlab

All of the above programs are free software.

Paulo Ferreira CT2ILQ

my_callsign@arrl.org    -> replace my_callsign