Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: RigBlaster Pro ICOM ACC1 Audio + FSK Pinouts Requi  (Read 779 times)
G7EIX
Member

Posts: 19


WWW

Ignore
« on: February 16, 2004, 10:07:42 AM »

Hi,

I would like to make my own Audio + FSK ACC1 Cable for my RigBlaster Pro - does anybody have the correct pinouts to make this cable?

Regards

Richard G7EIX
Logged
N4ZOU
Member

Posts: 340




Ignore
« Reply #1 on: February 21, 2004, 01:27:14 AM »

I don't know about the Rigblaster side pinouts as I just built my own interface but on the ICOM ACC1 side..

PIN 1 this is the pin that controls FSK Keying.
When PTT is enabled a Mark tone is produced and
when PIN 1 is grounded a Space tone is produced.

PIN 2 this is the ground pin.

PIN 3 this controls PTT, when grounded
the transceiver starts transmitting.

PIN 4 this is the microphone input jack
on the back of the transceiver.

PIN 5 this is the audio output jack.

A 5 pin DIN jack will work just fine in place
of the 8 pin DIN jack if you do not require
squelch, power, or ALC connections which you
should not.
Logged
VE2EWQ
Member

Posts: 1




Ignore
« Reply #2 on: April 03, 2004, 06:45:06 PM »

The cable is question has a 9 pin din at one end and 2 mini stereo jacks at the other.  Does anyone have the end 2 end wiring diagram for this cable?
If you do you can forward a copy to gvesnaver@qc.aibn.com

73's
George
VE2EWQ
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!