DigiPan

[VE9FP]

I am using DigiPan and Tigertronics SL-1 USB interface.The system works ok except that I used to see the signal on the waterfall in yellow color and now it is blue . This is the same clolor as the waterfall and is hard to see . How can I correct this?

[VE9FP]

I am on PSK 31 mode using Digipan software and Tigertronics SL1+ USB interface. In the past I received the signals on the waterfall in Yellow color. It is now green which is practically the same color as the waterfall background. I cannot see the signals very well. I do not not why this happended and I would like to know what to do to get the yellow color again
VE9FP
Email: ve9fp@rogers.com

[KE4DRN]

hi Francis,

Select configure from the toolbar,
then select colors.

You can reset to default or any color you like.

73 james

[WI7B]

In general, if you have not changed the color settings, the change in color is a reflection of singal strength that Digipan receives.

Have you adjusted you line-in signal levels? Your antenna, or the rig's audio output levels?

73,

---* Ken