Sorry once again, I am working two jobs plus dealing with several personal matters and just have not had the time to reply.
I'm sure I will look stupid for asking this, but when looking at the schematic below just exactly which wires do I connect? At the top of the schematic where RL1a and RL1b are, do I connect the two wires that are at the bottom (the two that are not connected at the present time?) My understanding is that this is in the receive mode. When you transmit RL1a and RL1b move from the contacts at the top and connect with the bottom contacts. Or am I completely off and this is in the transmit mode? If this is the case would I connect the two wires coming in from the sides (the two connected now?)
I told you I knew very little about this stuff, but I do want to learn. I even bought one of those 200 in 1 electronics project labs on eBay. I haven't had time to go through many of the projects yet, but hope to soon. I am the type that doesn't get a real understanding of something until I put it to use practically. The electronics theory is one thing when I read about it, but I want a practical knowledge. Something I can use to build things with.http://www.repeater-builder.com/radio-shack/hta-20/hta-20-schematic.jpg
Thanks again for your help, I appreciate it more than you know!
Scott - KC4YJI