Behringer 802 mixer for B-1 mike

[N4MJG]

Hi guys,

I have a question  for you all ! atfer  i  turn on the phantom  for the behringer B-1 i hook the mike first before turn on the switch , i've read manual on 802 and did not say need to turn off atfer  use ! my question is do you leave it on or turn  it  off  atfer use ? i just receive  B-1 as of 1/18/11 ! with any help thanks !! i'm using my ft 102

73
Jackie
N4MJG
WWW.N4MJG.COM

SKCC #7305

NAQCC #5233

[K0BG]

Jackie, you must have sent this on a Blackberry or something???

Just what are you trying to accomplish? Are you using a microphone EQ on you transceiver???

[VA7CPC]

After you have connected the B-1 to the 802 mixer, and turned on the "phantom power" switch, leave the "phantom power" switch ON.

The phantom power will turn off when you turn off the mixer, and turn on again when you turn on the mixer.

The B-1 mic will be fine.

                     Charles

[N4MJG]

Jackie, you must have sent this on a Blackberry or something???

Just what are you trying to accomplish? Are you using a microphone EQ on you transceiver???

yes since the mike did not came this radio when it was gaving to me from my uncle but someone gave it to him before me.

the behringer B-1  has real flat frq.reponse when you hook up into the mixer and ajusted  with nice clean audio and clear !

[KB1GTX]

Yes the B1 is a nice mic, it's a lot like the rode nt1a but a little brighter on the high end.

I use both on my ft857.