Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: Wouxon KG-UVD1P no RX audio - help!  (Read 1987 times)
M6PDS
Member

Posts: 1


WWW

Ignore
« on: December 21, 2011, 08:05:19 AM »

Hi all I'm having a problem with my newly purchased Wouxon KG-UVD1P/L (2m/4m but same specs at 70cm/2m).

Although I can be heard OK when transmitting, there's no audio output on receive (even though the green led on the top of the unit lights to indicate that there is an active signal being recieved). If I turn down squelch to zero I can hear the noise on the band, so I'm at a bit of a loss to explain what might be happening. Given the complexity (and lack of decent documentation) of the menus could I have inadvertantly set something incorrectly so that it mutes incoming signals?

Anyone with a Wouxon unit who might be able to shed any light on this?
Logged

Member of the Silverthorn Radio Club, Chingford, Essex
KG6BRG
Member

Posts: 119




Ignore
« Reply #1 on: December 23, 2011, 03:08:57 PM »

Check menu's 15,16,17,18.
For most repeater work, only #16 should be set to PL tone.  #15, 17,and 18 should be set to off (no tone).   
All else fail. Do a total reset off the radio and start over.  Cheers.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!