ic 703 & Mirage A1015

[9A7PJT]

 Hello all,
trying to find ways to connect via phono jack IC 703 and Mirage A1015 6m. older versions of linear.
I do not know which wires to connect and be given something to work on linear?


                                                                                      73 PJT

[AD6KA]

That amp uses either RF Sense keying (COR)
OR remote keying through the RC jack on the
back of the amp.

http://www.ko4bb.com/Manuals/08)_Misc_Ham_Equipment/Mirage/Mirage_A-1015-G/A-1015_Amplifier_Early_Model.pdf

If you absolutely must key the amp through it's phono
jack, use the ACC connector on the back of the 703.
You will need to setup a small relay to key an amp,
as shown in the 703's Manual on Page 16

[9A7PJT]

 Thank you  AD6KA,

but who / what relay is recommended ?



                                                              73 PJT