I don't like the lack of a DC return from the base of the 2N3553 to ground - asking for leakage problems. I'd put something like a 22 microhenry choke in there.
Or at least a resistor, maybe 22K or 47K. Probably not as much of a problem if you
are keying the DC to the whole rig, but it will keep the transistor off when when
the oscillator isn't running.
Put the ferrite bead over the leg of the transistor as close as possible to the case to
optimize VHF stability, even if it means elevating the case up above the board.
Last time I listened to the band, 10.106 seemed like a better choice for a crystal than
10.120 MHz if you are going to order one, otherwise you can use whatever you can find.