Hello all. Any Kenwood R-1000 guru's out there? I recently bought one and need help with the following:
1. The digital dial reads 100 KHz lower than the analog dial.
Read The Fine Manual -- get a copy of the Manual and read it to see how to twist the analog dial to match the digital readout.
2. The S meter is pegged way to the left. It's not stuck as it will bounce up a bit if the meter face is tapped.
RF Gain Control must be full clockwise to use the S meter.
3. The attenuator control knob has lost it's connection to the switch. The shaft coupling has broken.
Repair of replace broken shaft coupling.