Ok, I have searched the web and the service manual and cannot figure out where to go on this. Yesterday my FT-101E was working fine, except the receive/transmit was a little off. So, I followed the clarifier instructions found here: http://w3jxq.snycomp.com/ft101/clarifier.html
Now, I not only have no receive, I can no longer hear the 100khz calibration tone. I just get a steady hiss that is not affected by turning the preselect. The hiss changes a little by mode and band, but that is about all I get.
I tried the clarifier instructions a 2nd time and it didn't help. I even put things back to their original placement, but it didn't help. I then cleaned the contacts for the mode switch, etc., still no difference. I tried a 2nd antenna. No luck. I checked the receive fuse (bulb) and the acc plug. Still no help.
I have the service manual open and I am not finding what I should do.
So, I was wondering if anyone has experienced something like this before and if they can suggest what my next step should be. Thanks in advance for any help!