Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

donate to eham
   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: WSPR 2.12 and TS-590. Does your rig change bands and frequencies via WSPR?  (Read 5989 times)
2E0ILY
Member

Posts: 192




Ignore
« on: October 27, 2014, 11:37:47 AM »

I have struggled for ages getting my TS-590 to respond to band changes from within WSPR 2.12 and show, vice versa, the band the 590 is tuned to. I have tried both serial and USB modes, and although I RX and TX fine, upload spots and everything else seems hunky dory, I am unable to make the software see or set the rig frequency. If I try and change bands the DOS box shows an error:

Error attempting to set rig frequency.
rigctl -m 214 -r USB -s 19200 -C data_bits=8 -C stop_bits=1  -C serial_handshake=None F 7038600

Now, in my logging app, (which is not run concurrently...) the frequency read and send commands are F;   and  f;  is that the reason? If so, can it be changed without recompiling? I run under Windows 7 64 bit as administrator. many thanks for reading this Smiley
« Last Edit: October 27, 2014, 11:42:33 AM by 2E0ILY » Logged

Best regards, Chris Wilson.
WB0FDJ
Member

Posts: 178




Ignore
« Reply #1 on: October 27, 2014, 09:09:53 PM »

Chris

Just a question: Isn't the 590 supposed to be -m 231?

Doc
Logged
WB0FDJ
Member

Posts: 178




Ignore
« Reply #2 on: October 27, 2014, 09:23:36 PM »

Chris

Sorry I see that it is common to use that model with the 590. Good luck in your quest!

Doc
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!