Yaesu FT 2800 used for APRS? - APRS Forum at eHam.net

eHam.net Forum : APRS : Yaesu FT 2800 used for APRS?

Forum Help

1-3 of 3 messages

Page 1 of 1

Yaesu FT 2800 used for APRS?	Reply
by K9YS on April 17, 2008	Mail this to a friend!
I am considering a FT 2800 for APRS mainly just to get the extra power. I don't want to use the mic and spkr jacks to hook to the TNC- I read there is some type of jack/connector inside the unit? Has anyone used this 2meter rig for APRS? and how did you hook it up- Thank you and 73- Mike, K9YS

RE: Yaesu FT 2800 used for APRS?	Reply
by KG4RUL on April 17, 2008	Mail this to a friend!
Sorry to tell you that the only way to interface a TNC for APRS is via the mike and speaker jacks. This is a bare-bones rig.

RE: Yaesu FT 2800 used for APRS?	Reply
by KB3QFN on April 21, 2008	Mail this to a friend!
I also have a 2800M and am getting an OpenTracker1+. If anyone have used the same setup, please share your suggestions and idea. Thanks.

Page 1 of 1

Next Topic: Full Quieting Required for Packet Receive?
Previous Topic: PICPAC sub

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.