APRS with DeLorme PN-40 - APRS Forum at eHam.net

$\'\'$

$\'\'$

$\'\'$

eHam.net Forum : APRS : APRS with DeLorme PN-40

Forum Help

1-1 of 1 messages

Page 1 of 1

APRS with DeLorme PN-40	Reply
by K6ASK on December 26, 2008	Mail this to a friend!
Been using a Magellan GPS with NMEA 183 ouput to send data packets to my Kenwood THD7A(G) handheld radio for tracking my position via APRS. It's been working flawlessly. Now I have received a PN-40 as a wonderful gift this Christmas. It's a fantastic GPS receiver, etc. However, it does not seem to provide NMEA 183 formatted output via a serial (9 pin) connector. A couple of posts on Delorme Forums indicated that a serial cable is available from Delorme and will provide the NMEA 183 output. Hopefully this is true and I can purchase the cable and make the connection to my THD7AG. Seems like I also need to configure the PN-40 to output the NMEA formatted packets. Any help with that?

Page 1 of 1

Next Topic: VX-8R
Previous Topic: elcom utnt plus users ?????

Email Subscription
You are not subscribed to this topic.

Check our help page for help using Forum, or send questions, comments, or suggestions to the Forum Manager.

$\'\'$